Hi Jim. As far as I know, the DecTalk external has only been tested with version 2.0 of the firmware. If you power up your DecTalk external and you hear the test dial tones followed by "DecTalk 2.0 is running.", then you definitely have a dectalk external that will work. To other folks on the list, there seems to be some confussion for some of you about what is a dectalk external, and what is a dectalk express. The difference is that the old external dectalk is a big box about 4 inches high, about 18 inches long, and about 12 inches wide. It does not have an ac adapter, but uses a standard grounded power cable. The express is about 1.5 inches thick, about 8 inches long, and about 4 inches wide. It uses an adapter cable with a power brick on the wall end. I hope this helps clear up some confussion. Gene >Ok here is the question when we speak of the dectalk external how far >back in firmware do we go. >I got a clasic model here version 2.0. the faq reports that the dectalk >external works with speakup. It says external or express so I am >assuming here that we are speaking of the dectalk clasic model also. >This device supports indexing while the one x serize does not. >Thanks a bundle. > >jim grimsby >msn: jim.grimsby at att.net >email: jimgrims at pacbell.net >skype: jim.grimsby > > > >_______________________________________________ >Speakup mailing list >Speakup at braille.uwo.ca >http://speech.braille.uwo.ca/mailman/listinfo/speakup
