ou said the double talk or acentsa synth is external these isa or serial port ones? if serial port ones or external useable ones I have no isa slots on my pc, can I get one of the synths? if so how much for shipping? thanks hank ----- Original Message ----- From: "Scott Howell" <s.howell@xxxxxxxxxxx> To: "Speakup is a screen review system for Linux." <speakup at braille.uwo.ca> Sent: Sunday, April 09, 2006 4:24 AM Subject: hardware that needs a new home > Folks, got the go ahead for this so wanted you to know that in advance. > > I've got a small pile of hardware that I'd not necessarily like to > make a million on, but would at least like to recover shipping costs > and make a dollar or two in order to pay off my wife.grin Ay she's > transporting the stuff. I'll ship mostly via USPS unless you have a > real desire for it to go UPS. > Here is what I got so make me a reasonable offer. > > I > 1. complete system and would like it to go that way unless there are > no takers. > Dual PIII 550 on an MSI mother board w/manual for board, Adaptec > 2950UW2 scsi card, 256Mb ram, 20Gb hd, floppy, internal DoubleTalk-Pc > and/or internal Accent board setup as an external synth at this point > both currently in the box, Antec mid-tow case w/following configuration. > > Case has 4 5.25 exposed bays, 2 exposed 3.5 bays, 4 internal 3.5 bays > (note 3.5 bays are in removable cages and all 5.25 bays are outfited > with rails for easy removal of devices), 400 watt power supply, > plenty of fans, one in 3.5 cage, one at bottom front, two at rear > below power supply, door covering 5.25/3.5 exposed bays w/lock, and a > very very durable case. All components work, but selling as is. This > stuff is not brand new. The mother board is an MSI 6120 with two ps2 > ports, 2 serial, 1 parallel, no sound, 1 agp slot, 4 pci and 2 isa > slots, one pci/isa slots are shared, standard ide supports up to > 30Gb, but a flash will take it beyond this I have not done it, I > don't hae the means to make a boot floppy for dos, has one scsi cdrom > and can include a scsi cdrw burner Plexstor 12X burner, and manuals > for most of the stuff. This hardware is no longer needed and don't > want to just toss it. I'd like to mention the machine will handle up > to 800Mhz processors and they are slot 1. > I also have a usb multi-card reader that is an internal 3.5 device, > but I've not been able to get this to work on my other box. I think > the internal usb port connector on the board isn't operating. Tis is > a different machine I'm referring to, but the reader as far as I know > works fine. I should also mention in the dual cpu box I do have a > 3Com 900 which is supported by Linux, actually all the hardware in > the box is supported by Linux. If you want a distro installed, I can > do that, currently it doesn't have one installed and oh yes of course > it does have 2 usb 1 ports. I've also a couple of nics which are > Dlink cards and are supported by Linux. If anyone is interested in > this stuff and would like to make an offer, please let me know. The > machine will cost a few bucks to ship, its pretty heavy and will be > packed extremely well and insured. > > tnx > > Scott > > > > > _______________________________________________ > Speakup mailing list > Speakup at braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > __________ NOD32 1.1479 (20060409) Information __________ > > This message was checked by NOD32 antivirus system. > http://www.eset.com > >
