* Glenn at home <GlennErvin at cableone.net> wrote: > I have gotten it to work with my DecTalk express, and I have the commands > for that, but I am wondering if I can get GRML to work with software speech, > with the same GRML CD? Yes. You just have to boot using 'grml swspeak' and type 'speechd-up' when booting finished. Notice: I slightly reworked the swspeak feature. grml 0.7 will boot with 'grml swspeak' as well but will provide some sound output already during startup. This means you should be able to notice whether your soundcard works or not already during bootup. And before being dropped into the shell when booting finished you'll get a short notice via sound as well. Starting the software speech support then will work through running 'swspeak'. You can use the speechd-up command as well, but swspeak is an alias to improve the zsh setup for use with speechd-up. Main work on grml 0.7 has been finished, now I'm running some last few tests and updating documentation and webpage for the new release. Expect to find grml 0.7 in the next few days on the mirrors. I also wrote some documentation for accessibility related issues in the grml-wiki: http://wiki.grml.org/doku.php?id=accessibility If you have any feedback I'll appreciate it if you send it to me. HTH && regards, -mika- -- http://grml.org/ # Linux for texttool-users and sysadmins http://wiki.grml.org/ # share your knowledge http://grml.supersized.org/ # the grml development weblog #grml @ irc.freenode.org # meet us on irc
