You might try vga=15492 which is 132 by 60 or if your video card won't take that try vga=15440 which is 60 by 80. on Thursday 09/16/2004 Chuck Hallenbeck(chuckh at sent.com) wrote > This is a progress report that might encourage others to experiment: > > I changed my lilo.conf to use the line > > vga = 791 > > instead of > > vga = normal > > and then rebooted. I now have a 128 by 48 character display. When I > checked to see which applications were working correctly with the new > screen size, I found that lynx, pine, nano, mutella, less, and the man > pages, all were correctly resized to the new screen size. My text > reader, rita the reader, had to have its rita.cfg file changed to the > new screen parameters, but hey, that's a home made amateur program. So > far I see no down side to this new setup. > > As for nano, I invoke it with a line length limit of 72 chars, so that > it wraps at that point, but without that command line option it too > would use the entire 128 char width. I will retain the 72 char width to > facilitate printing and emailing. > > I am happy as a clam. > > Chuck > > > -- > The Moon is Waxing Crescent (4% of Full) > Home page at http://www.mhcable.com/~chuckh > Speakfreely address 24.105.197.112:2074 > > _______________________________________________ > Speakup mailing list > Speakup at braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup -- John Covici covici at ccs.covici.com
