Hi everyone. I've recently upgraded to kernel 2.6.8 on this box. Actually, they're the RPM's available on bumpy. Also, recently upgraded to Cdrecord version 2.01. On three separate ocasions, I get errors during the writing process. Here's a parcial snapshot of the output from cdrecord. The burn line was as follows: cdrecord -pad -audio -eject *.wav -dev=/dev/cdrom1 Note that this has worked before with no problems. Anyways, here's the output. G ' Identifikation : 'CD-RW CED-8080B ' Revision : '1.04' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC SWABAUDIO Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Starting to write CD/DVD at speed 8.0 in real TAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. trackno=0 cdrecord: Success. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 20 10 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63504 cmd finished after 2.259s timeout 40s write track data: error after 19305216 bytes cdrecord: A write error occured. cdrecord: Please pro -- Erik Heil <eheil at va3duk.serveftp.com> Phone: (865) 673-0542
