-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Actually, you don't need an overly fast box to do it on a stage 1 or 2. Some of the infrastructure people I work with build gentoo on very very very slow alpha's. It's doable on slow machines, but it takes quite a bit of time on slow machines. For example. glibc takes 3.5 hours to build on a p3 450 with 128mb of ram. I don't mind the slowness, because I like the end results, but if you want it to set up and work quickly, then stage3 is definitly better for you:) On Fri, 2 Jan 2004, Alex Snow wrote: > I'd also emagine you need a relativly fast box if you are using stage > 1 or 2 with all the software compiling. the box I am working with is a > pII/233 with 72mb ram. > On Fri, Jan 02, 2004 at 11:22:47AM -0600, Deedra > Waters wrote: > > -----BEGIN PGP SIGNED MESSAGE----- > > Hash: SHA1 > > > > Stage1 is fun, but it does take a lot to learn about it. I made the mistake of starting out with stage1, and not knowing enough. Fortunately for me, I had a friend who helped me when I had the wrong CFLAGS set, among other problems, and caused the bootstrap to die while compiling glibc. Stage1 is nice, but you need to have a lot of patience with it, though the end result is a nicely optomised system. > > > > > > On Fri, 2 Jan 2004, Alex Snow wrote: > > > > > downloaded it, burned it, and am currently booting it. > > > > > > I think i will start out with the stage 3 tarball until I learn more > > > about how gentoo works. then I may try stage 1 or 2. > > > On Fri, Jan 02, 2004 > > > at 10:28:58AM -0600, Deedra Waters wrote: > > > > -----BEGIN PGP SIGNED MESSAGE----- > > > > Hash: SHA1 > > > > > > > > hi alex. > > > > You have to use the x86 experimental livecd located here: http://gentoo.oregonstate.edu/experimental/x86/livecd/livecd-2.6_11-29-200 > > > > 3.iso > > > > > > > > this is pretty much a basic iso so you need to download the stage tarball of your choice seperately. The install docs will tell you how to get a stage tarball if you do not have one > > > > > > > > You will need to burn the cd, then boot it. stick the cd in, start the machine, once the cd drive stops spinning, type 'gentoo speakup_synth=your_synth_here' You have about 30 seconds or so to enter this. If you do not enter that at the boot prompt, you will not have a talking install. > > > > > > > > I would suggest that you know ahead of time, what stage you want to use. It will make your life much easier in the longrun. I would also suggest that if you are new to linux and gentoo that you use the stage 3 tarball. this will make your install much quicker, and it can save you a lot of trouble in the long run, especially if you know little about CFLAGS and CXXFLAGS. > > > > > > > > I'm happy to answer questions if you have them. > > > > > > > > > > > > On Fri, 2 Jan 2004, Alex Snow wrote: > > > > > > > > > Ok I'm thinking of installing gentoo on a spare box. I'v had a look at > > > > > the install manual and picked my install media. I think the gnome/kde > > > > > livecd looks the coolist since it's got a lot of stuff on it. it's > > > > > either this or the regular livecd. I was just wondering if this cd has > > > > > speakup on it and how I would get the install started? > > > > > any help would be apreciated. > > > > > > > > > > > > > > > > > > - -- > > > > Gentoo Linux: Gentoo infrastructure, dmwaters at gentoo.org, > > > > http://www.gentoo.org > > > > > > > > Freenode staff member: dmwaters at freenode.net , http://www.freenode.net > > > > > > > > -----BEGIN PGP SIGNATURE----- > > > > Version: GnuPG v1.2.3 (GNU/Linux) > > > > > > > > iD8DBQE/9ZxQU5AGPOTGNc8RAtoRAKCJooldjfYn0f8EX9IEFJ9ZsiHquwCfaf9h > > > > DBAq2yOdtC4KPof0T6qhun4= > > > > =qTDu > > > > -----END PGP SIGNATURE----- > > > > > > > > _______________________________________________ > > > > Speakup mailing list > > > > Speakup at braille.uwo.ca > > > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > > > > > > > > - -- > > Gentoo Linux: Gentoo infrastructure, dmwaters at gentoo.org, > > http://www.gentoo.org > > > > Freenode staff member: dmwaters at freenode.net , http://www.freenode.net > > > > -----BEGIN PGP SIGNATURE----- > > Version: GnuPG v1.2.3 (GNU/Linux) > > > > iD8DBQE/9aj0U5AGPOTGNc8RAmX8AKCJw51mXhSYwd+iD6HMt2Dp0Y1gFQCfZHkG > > vZQ116O5f7+Gy6QwSOv02+I= > > =KZqR > > -----END PGP SIGNATURE----- > > > > _______________________________________________ > > Speakup mailing list > > Speakup at braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > - -- Gentoo Linux: Gentoo infrastructure, dmwaters at gentoo.org, http://www.gentoo.org Freenode staff member: dmwaters at freenode.net , http://www.freenode.net -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/9cZNU5AGPOTGNc8RAq6IAKCXpmhCx7UiyoU8ZRxs/JoloZn0GQCgnGxJ N1WTHnnGcE7jQ6C8Xkv4Km4= =xKty -----END PGP SIGNATURE-----
