Folks: How 'bout using /dev/synth when Speakup is running to talk
directly to the DT-Express. If you don't have it, do:
mknod /dev/synth c 10 25
HTH.
--
Bill in Denver
On Sat, 7 Feb 2004, Garrett Klein wrote:
>
> Methinks that it's because of Speakup hogging the com port, even if you kill
> it with prtsc...
>
>
> ----- Original Message -----
> From: "Igor Gueths" <igueths at comcast.net>
> To: "Speakup is a screen review system for Linux." <speakup at braille.uwo.ca>
> Sent: Wednesday, February 04, 2004 4:28 PM
> Subject: Re: flashing dectalk
>
>
> > Hmmm. This is very weird...I'm still not getting the firmware version. I
> > tried echo "[:ver speak]" >/dev/ttyS0 and that gotme back to the prompt.
> > I also did /dev/ttys0 and I got an input/output error. I wonder what
> > echo is doing to the command?
> > On Wed, Feb 04, 2004 at 03:07:27PM -0500, Whitley CTR Cecil H wrote:
> > > Igor,
> > > Try:
> > > echo "[:ver speak]" >/dev/ttys0
> > > Linux may be trying to replace the [ or ]? Enclosing it in quotes may
> help.
> > > Yes, I pulled the command straight out of the manual and tested on my
> system
> > > (Win NT 4).
> > > Sorry I couldn't provide more definative answers.
> > > Cecil
> > > _______________________________________________
> > > Speakup mailing list
> > > Speakup at braille.uwo.ca
> > > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup at braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> >
>
>
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
