Ok. I'll see what I can find on it. On Thu, Nov 27, 2003 at 01:01:19PM -0600, Gregory Nowak wrote: > I seem to recall that although that modem is supported as an isa pnp > device, it needs windows drivers in order to do error correction. So, > if you get the modem to work without hanging up, and you are willing > to live without error correction, then go for it. To my knowledge, > there is currently no gnu/linux software that could do the error > correction part. > > Hth. > > Greg > > > On Thu, Nov 27, 2003 at 01:04:22PM -0500, Alex Snow wrote: > > Hi all. > > I have a u.s. robotics sportster 33.6 mode in one of my boxes. this is > > an isa plug 'n play modem. I was just wondering if this modem is > > supported? the only info I could find on it is in portuguese. > > AI have serial.conf and isapnp.conf set up for this modem but when I do > > cu -l /dev/ttyS3 it connects then gets a hangup signal. > > > > -- > > Always borrow money from a pessimist; he doesn't expect to be paid > > back. > > > > > > _______________________________________________ > > Speakup mailing list > > Speakup at braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > -- > Free domains: http://www.eu.org/ or mail dns-manager at EU.org > > > _______________________________________________ > Speakup mailing list > Speakup at braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup -- Always borrow money from a pessimist; he doesn't expect to be paid back.
