I seem to recall that although that modem is supported as an isa pnp device, it needs windows drivers in order to do error correction. So, if you get the modem to work without hanging up, and you are willing to live without error correction, then go for it. To my knowledge, there is currently no gnu/linux software that could do the error correction part. Hth. Greg On Thu, Nov 27, 2003 at 01:04:22PM -0500, Alex Snow wrote: > Hi all. > I have a u.s. robotics sportster 33.6 mode in one of my boxes. this is > an isa plug 'n play modem. I was just wondering if this modem is > supported? the only info I could find on it is in portuguese. > AI have serial.conf and isapnp.conf set up for this modem but when I do > cu -l /dev/ttyS3 it connects then gets a hangup signal. > > -- > Always borrow money from a pessimist; he doesn't expect to be paid > back. > > > _______________________________________________ > Speakup mailing list > Speakup at braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup -- Free domains: http://www.eu.org/ or mail dns-manager at EU.org
