Let me see if I understand what this is all about... 1) The BNS and the BLT use the same driver. However, since the M20 does not support sound output on its speech box mode I would never get speech out of it... 2) The startup messages are too much for the Audaptor, but can be work around by holding Keypad-0 + Keypad-Enter while the computer starts... 3) Nobody addressed this problem so I am still totally in the dark on this... Please correct me if I am wrong and if you have anything to add/subtract/modify please let me know :) Cheers!! --David At 07:39 PM 9/10/2002 -0700, I wrote: >Hello everyone > >I came across some problems while using speakup and thought some of you >might be able to solve my puzzles... > >1) I have both Braille n' Speak and Braille Lite. Speakup works >perfectly if I plug my BNS into the computer, but refuse to talk if I use >my BLT. Do they have different 'drivers'? > >2) A friend gave me an old Audaptor, so I tried using that to install on >a new computer. The speech box stops reading as soon as the Welcome >screen pops up and won't talk after that point. Any one any clue? > >3) I might get a more permanant speech box (the speaker in the BNS is >starting to crack and it is making this annoying humming noise). Where is >the synthesizer info kept in the system? > >I hope I am not throwing too many questions at one time, and thanks for >all your suggestions!!! > >--David > > >_______________________________________________ >Speakup mailing list >Speakup at braille.uwo.ca >http://speech.braille.uwo.ca/mailman/listinfo/speakup
