Hi Dan. If you have two hardware synths, running both in separate ttys will work. However, if you are using the same synth and Speakup is running, you're going to get i/o errors when you try to run both packages at the same time. One thing to try would be rebooting (I know Linux users like me hate rebooting their box), but you need to pass speakup_synth=none to lilo so that the dectalk module doesn't get loaded at boot time. Even if you hit print-screen to kill Speakup then run Emacspeak, this won't work because the Dectalk module doesn't give /dev/ttyS0 or whatever port you are using back to the kernel and say that its done with the device. I myself have been trying to correct this, but no success as of yet. ----- Original Message ----- From: Dan Murphy <mweeby@xxxxxxxxxxxxx> To: <speakup at braille.uwo.ca> Sent: Sunday, May 19, 2002 8:41 AM Subject: Re: interesting experiment. > Hi. this may sound dumb, but where do I get Emacspeak? I've been a > died-in-the-wool Speakup person for a long time, but I've heard that I > can run both simultaneously on different consoles, so now I'm curious. > thanks. > On > Sat, 18 May 2002, Ann Parsons wrote: > > > Hi All, > > > > Again, Emacspeak was configured and written for the DecTalk card. Use > > it. > > > > Ann P. > > > > -- > > Ann K. Parsons > > email: akp at eznet.net ICQ Number: 33006854 > > WEB SITE: http://home.eznet.net/~akp > > "All that is gold does not glitter. Not all those who wander are lost." JRRT > > > > > > _______________________________________________ > > Speakup mailing list > > Speakup at braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > > Dan Murphy > mailto:mweeby at earthlink.net > Let us not look back in anger or forward > in fear, but around us in awareness. > -- James Thurber > > > _______________________________________________ > Speakup mailing list > Speakup at braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup
