I'm using a speakup-free kernel for this with the console on line printer compiled in. The kernel is 2.4.2. Greg On Tue, May 15, 2001 at 04:28:07AM +1000, Geoff Shang wrote: > On Sun, 13 May 2001, Gregory Nowak wrote: > > > blazer here. I thought of setting up speech through the blazer's parallel > > port, and using the line printer console. However, when I include > > "console=lp0" on the loadlin command line, the kernel oopses, and I don't > > know of how to activate the console on /dev/lp0 after logon. Any > > There might be some conflict here with speakup and such options. When Kirk > so wonderfully wrote the transport driver for me and I compiled speakup > into 2.2.12, I had serial consoles compiled in at the time, though I > hadn't actually set the thing up. Speakup 0.08 did not like this at all > and oopsed out. Removing it from my kernel fixed it nicely. I don't know > if anything has been done about this or not, but it's possible that such > code will not work at all with speakup installed. > > Geoff. > > > > _______________________________________________ > Speakup mailing list > Speakup at braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup
