Kirk, My sblive card has 5 jacks. Also, all the outputs are set to max volume in asound.conf, and the problem I described in an earlier reply to the same subject is still there. Greg > ----- Original Message ----- >From: Kirk Reiser <kirk at braille.uwo.ca >To: speakup at braille.uwo.ca >Date: 21 Aug 2001 18:28:00 -0400 >Subject: Re: sblive speaker configurations >Hi Chuck: The answer is actually simple. What you think of as the >lineout on your sblive is actually your rear out. The four jacks on >the back are line-in, microphone, front-out and rear-out. So if you >increase your rear speaker volume in amixer you should be amazed by >the output of your non-working powered speakers. > Kirk >-- >Kirk Reiser The Computer Braille Facility >e-mail: kirk at braille.uwo.ca University of Western Ontario >phone: (519) 661-3061 >_______________________________________________ >Speakup mailing list >Speakup at braille.uwo.ca >http://speech.braille.uwo.ca/mailman/listinfo/speakup
