Problems: RH6.2 boot disk & BNS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Question, Is there a list available of possible options to be entered at the
boot prompt.  I tried recently to see if my speakout would work on com2 and
speakup didn't find it automatically.  Don't know if it was supposed to or
not.  I don't recall seeing any kind of reference for these boot options.

Is version 0.09 still the most recent version?  I'm not yet familiar with
the use of CVS facilities.

-----Original Message-----
From: Kirk Reiser [mailto:kirk@xxxxxxxxxxxxxx]
Sent: Thursday, November 30, 2000 5:14 AM
To: speakup at braille.uwo.ca
Subject: Re: Problems: RH6.2 boot disk & BNS


Hi Laurent:  The appropriate settings are almost the default, 9600 n,
8, 1 with hardware handshake.  The unit gets best results with the
chord-s speechbox mode.

If that doesn't work automagically you can specify speakup_ser=1 for
com2 on the boot line after typing linux.  So for example at the boot
prompt you would type:

linux speakup_ser=1

You use 0 for com1 and so forth.

We have rewritten parts of that driver in the cvs code but I don't
suggest you use that until you have a good understanding of linux
first.

good luck
  Kirk

-- 

Kirk Reiser				The Computer Braille Facility
e-mail: kirk at braille.uwo.ca		University of Western Ontario
phone: (519) 661-3061

_______________________________________________
Speakup mailing list
Speakup at braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup




[Index of Archives]     [Linux for the Blind]     [Fedora Discussioin]     [Linux Kernel]     [Yosemite News]     [Big List of Linux Books]
  Powered by Linux