Hi. I tried Speakup version 0.09a with Linux version 2.4.0-test1 and an
internal doubletalk, and Speakup didn't find my internal doubletalk. My
internal Doubletalk works with Speakup 0.09 and Linux version 2.2.16, so
I'm guessing it is a bug in Speakup 0.09a. I attached my kernel messages
from when I booted 2.4.0-test1 to this message. Thanks.
-------------- next part --------------
Linux version 2.4.0-test1 (root at rmnet) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #2 Mon Jun 19 22:18:58 EDT 2000
BIOS-provided physical RAM map:
e820: 000000000009f800 @ 0000000000000000 (usable)
e820: 0000000000000800 @ 000000000009f800 (reserved)
e820: 0000000000019000 @ 00000000000e7000 (reserved)
e820: 0000000003ffd800 @ 0000000000100000 (usable)
e820: 0000000000002000 @ 00000000040fd800 (ACPI data)
e820: 0000000000000400 @ 00000000040ff800 (ACPI NVS)
e820: 0000000001f00400 @ 00000000040ffc00 (usable)
e820: 0000000000019000 @ 00000000fffe7000 (reserved)
On node 0 totalpages: 24576
zone(0): 4096 pages.
zone(1): 20480 pages.
zone(2): 0 pages.
Enabling extended fast FPU save and restore ... done.
Enabling KNI unmasked exception support ... done.
Kernel command line: BOOT_IMAGE=linux ro root=303
Initializing CPU#0
Detected 447694713 Hz processor.
Probing for DoubleTalk.
DoubleTalk PC: not found
DoubleTalk PC: device probe failed
Speakup v-0.09: initialized
Console: colour VGA+ 80x25
Calibrating delay loop... 891.29 BogoMIPS
Memory: 94412k/98304k available (1355k kernel code, 3492k reserved, 98k data, 96k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
kmem_create: Poisoning requested, but con given - bdev_cache
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
kmem_create: Poisoning requested, but con given - inode_cache
CPU: Intel Pentium III (Katmai) stepping 03
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfd983, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/122e] at 00:07.0
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.3
Based upon Swansea University Computer Society NET3.039
kmem_create: Poisoning requested, but con given - skbuff_head_cache
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
Starting kswapd v1.6
parport0: PC-style at 0x378 [PCSPP]
parport0: irq 7 detected
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x14e0-0x14e7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x14e8-0x14ef, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 91360U4, ATA DISK drive
hdc: TOSHIBA CD-ROM XM-6602B, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 26588016 sectors (13613 MB) w/2048KiB Cache, CHS=1655/255/63, UDMA(33)
Partition check:
hda: hda1 hda2 hda3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ncr53c8xx: at PCI bus 0, device 16, function 0
ncr53c8xx: 53c875E detected with Tekram NVRAM
ncr53c875E-0: rev 0x26 on pci bus 0 device 16 function 0 irq 9
ncr53c875E-0: Tekram format NVRAM, ID 7, Fast-20, Parity Checking
ncr53c875E-0: on-chip RAM at 0xf4000000
ncr53c875E-0: restart (scsi reset).
ncr53c875E-0: Downloading SCSI SCRIPTS.
scsi0 : ncr53c8xx - version 3.2i
scsi : 1 host.
Vendor: YAMAHA Model: CRW6416S Rev: 1.0c
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0
scsi : detected 1 SCSI cdrom total.
ncr53c875E-0-<1,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15)
sr0: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.08
Serial driver version 4.93 (2000-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10c
PPP generic driver version 2.4.1
3c59x.c:v0.99L+LK1.1.5 30 Apr 2000 Donald Becker and others http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html $Revision: 1.78 $
eth0: 3Com PCI 3c905C Tornado at 0x1400, 00:50:da:12:4b:50, IRQ 10
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 7809.
3c59x: Wake-on-LAN functions disabled
Enabling bus-master transmits and whole-frame receives.
PPP BSD Compression module registered
ip_conntrack (768 buckets, 6144 max)
ip_tables: (c)2000 Netfilter core team
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 96k freed
Adding Swap: 104416k swap-space (priority -1)
[EXT II FS 0.5b, 95/08/09, bs=4096, fs=4096, gc=93, bpg=32768, ipg=32768, mo=ffffffea]
hdc: driver not present
eth0: using NWAY autonegotiation
