Chris, are you compiling from .rpm files or from .tgz or .tar.gz? The problem is that Emu10k1 drivers use /dev/dsp to read and write the audiodata to and from. Speak_freely, however, uses /dev/audio to accomplish that. Kerry once suggested that I recompile Speak_freely to redirect its input&output to /dev/dsp by using the LINEAR_NEEDED_DSP parameter (or something of that sort, you will be able to uncomment it in the Makefile), but it worked for me only partially. Let me know if you get it working finally. Regards, Vic ----- Original Message ----- From: "Chris Nestrud" <cnestru@xxxxxxxxxxxxx> To: <speakup at braille.uwo.ca> Sent: Wednesday, July 05, 2000 2:57 PM Subject: speakfreely and the speakup reflector > Hello all. I'm trying to get speakfreely compiled so I can chat on the > speakup reflector. This is redhat-6.2 with a soundblaster live and the > emu10k drivers from opensource.creative.com. Recording and playback from > other applications works with no problems, and speakfreely compiles with > no errors, but cores when I try to connect to the reflector. I'm using the > "reflector" script from ftp.braille.uwo.ca, slightly modified to use csh > instead of bash. I'm including it below. Any suggestions? I'm assuming > this is an audio issue, and not something to do with the reflector. > > Chris > > Script follows: > #!/bin/csh > echo "Attempting to connect." > setenv SPEAKFREE_LWL_TELL=lwl.braille.uwo.ca > setenv SPEAKFREE_ID="Chris" > sfspeaker -j -p4074 & > sfspeaker -j & > sfmike -T lwl.braille.uwo.ca:4074 > > > > _______________________________________________ > Speakup mailing list > Speakup at braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup