On Fri, Nov 30, 2018 at 3:45 AM Evan Green <evgreen@xxxxxxxxxxxx> wrote:
>
> Move #clock-cells into the child node and set it to 0 to conform to the
> proper binding specification.
>
> Signed-off-by: Evan Green <evgreen@xxxxxxxxxxxx>
> ---
>
> arch/arm64/boot/dts/qcom/msm8996.dtsi | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index 13bb96444df00..4af740ca0880f 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -767,7 +767,6 @@
> phy@34000 {
> compatible = "qcom,msm8996-qmp-pcie-phy";
> reg = <0x34000 0x488>;
> - #clock-cells = <1>;
> #address-cells = <1>;
> #size-cells = <1>;
> ranges;
> @@ -790,6 +789,7 @@
> reg = <0x035000 0x130>,
> <0x035200 0x200>,
> <0x035400 0x1dc>;
> + #clock-cells = <0>;
> #phy-cells = <0>;
>
> clock-output-names = "pcie_0_pipe_clk_src";
> @@ -803,6 +803,7 @@
> reg = <0x036000 0x130>,
> <0x036200 0x200>,
> <0x036400 0x1dc>;
> + #clock-cells = <0>;
> #phy-cells = <0>;
>
> clock-output-names = "pcie_1_pipe_clk_src";
> @@ -816,6 +817,7 @@
> reg = <0x037000 0x130>,
> <0x037200 0x200>,
> <0x037400 0x1dc>;
> + #clock-cells = <0>;
> #phy-cells = <0>;
>
> clock-output-names = "pcie_2_pipe_clk_src";
> @@ -829,7 +831,6 @@
> phy@7410000 {
> compatible = "qcom,msm8996-qmp-usb3-phy";
> reg = <0x7410000 0x1c4>;
> - #clock-cells = <1>;
> #address-cells = <1>;
> #size-cells = <1>;
> ranges;
> @@ -851,6 +852,7 @@
> reg = <0x7410200 0x200>,
> <0x7410400 0x130>,
> <0x7410600 0x1a8>;
> + #clock-cells = <0>;
> #phy-cells = <0>;
>
> clock-output-names = "usb3_phy_pipe_clk_src";
> --
> 2.18.1
>
Tested on db820c [1]
Tested-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
[1] https://github.com/vivekgautam1/linux/tree/origin/v4.20-rc5/db820c
BRs
Vivek
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
