On Wed, Mar 29, 2017 at 11:07:35AM +0800, Leo Yan wrote:
> Hi Suzuki,
>
> On Mon, Mar 27, 2017 at 05:34:57PM +0100, Suzuki K Poulose wrote:
> > On 25/03/17 18:23, Leo Yan wrote:
>
> [...]
>
> > Leo,
> >
> > Thanks a lot for the quick rework. I don't fully understand (yet!) why we need the
> > idle_constraint. I will leave it for Sudeep to comment on it, as he is the expert
> > in that area. Some minor comments below.
>
> Thanks a lot for quick reviewing :)
>
> > >Signed-off-by: Leo Yan <leo.yan@xxxxxxxxxx>
> > >---
> > > drivers/hwtracing/coresight/Kconfig | 11 +
> > > drivers/hwtracing/coresight/Makefile | 1 +
> > > drivers/hwtracing/coresight/coresight-cpu-debug.c | 704 ++++++++++++++++++++++
> > > 3 files changed, 716 insertions(+)
> > > create mode 100644 drivers/hwtracing/coresight/coresight-cpu-debug.c
> > >
> > >diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
> > >index 130cb21..18d7931 100644
> > >--- a/drivers/hwtracing/coresight/Kconfig
> > >+++ b/drivers/hwtracing/coresight/Kconfig
> > >@@ -89,4 +89,15 @@ config CORESIGHT_STM
> > > logging useful software events or data coming from various entities
> > > in the system, possibly running different OSs
> > >
> > >+config CORESIGHT_CPU_DEBUG
> > >+ tristate "CoreSight CPU Debug driver"
> > >+ depends on ARM || ARM64
> > >+ depends on DEBUG_FS
> > >+ help
> > >+ This driver provides support for coresight debugging module. This
> > >+ is primarily used to dump sample-based profiling registers when
> > >+ system triggers panic, the driver will parse context registers so
> > >+ can quickly get to know program counter (PC), secure state,
> > >+ exception level, etc.
> >
> > May be we should mention/warn the user about the possible caveats of using
> > this feature to help him make a better decision ? And / Or we should add a documentation
> > for it. We have collected some real good information over the discussions and
> > it is a good idea to capture it somewhere.
>
> Sure, I will add a documentation for this.
>
> [...]
>
> > >+static struct pm_qos_request debug_qos_req;
> > >+static int idle_constraint = PM_QOS_DEFAULT_VALUE;
> > >+module_param(idle_constraint, int, 0600);
> > >+MODULE_PARM_DESC(idle_constraint, "Latency requirement in microseconds for CPU "
> > >+ "idle states (default is -1, which means have no limiation "
> > >+ "to CPU idle states; 0 means disabling all idle states; user "
> > >+ "can choose other platform dependent values so can disable "
> > >+ "specific idle states for the platform)");
> >
> > Correct me if I am wrong,
> >
> > All we want to do is disable the CPUIdle explicitly if the user knows that this
> > could be a problem to use CPU debug on his platform. So, in effect, we should
> > only be using idle_constraint = 0 or -1.
> >
> > In which case, we could make it easier for the user to tell us, either
> >
> > 0 - Don't do anything with CPUIdle (default)
> > 1 - Disable CPUIdle for me as I know the platform has issues with CPU debug and CPUidle.
>
> The reason for not using bool flag is: usually SoC may have many idle
> states, so if user wants to partially enable some states then can set
> the latency to constraint.
>
> But of course, we can change this to binary value as you suggested,
> this means turn on of turn off all states. The only one reason to use
> latency value is it is more friendly for hardware design, e.g. some
> platforms can enable partial states to save power and avoid overheat
> after using this driver.
>
> If you guys think this is a bit over design, I will follow up your
> suggestion. I also have some replying in Mathieu's reviewing, please
> help review as well.
>
> > than explaining the miscrosecond latency etc and make the appropriate calls underneath.
> > something like (not necessarily the same name) :
> >
> > module_param(broken_with_cpuidle, bool, 0600);
> > MODULE_PARAM_DESC(broken_with_cpuidle, "Specifies whether the CPU debug has issues with CPUIdle on"
> > " the platform. Non-zero value implies CPUIdle has to be"
> > " explicitly disabled.",);
>
> [...]
>
> > >+ /*
> > >+ * Unfortunately the CPU cannot be powered up, so return
> > >+ * back and later has no permission to access other
> > >+ * registers. For this case, should set 'idle_constraint'
> > >+ * to ensure CPU power domain is enabled!
> > >+ */
> > >+ if (!(drvdata->edprsr & EDPRSR_PU)) {
> > >+ pr_err("%s: power up request for CPU%d failed\n",
> > >+ __func__, drvdata->cpu);
> > >+ goto out;
> > >+ }
> > >+
> > >+out_powered_up:
> > >+ debug_os_unlock(drvdata);
> >
> > Question: Do we need a matching debug_os_lock() once we are done ?
>
> I have checked ARM ARMv8, but there have no detailed description for
> this. I refered coresight-etmv4 code and Mike's pseudo code, ther have
> no debug_os_lock() related operations.
>
> Mike, Mathieu, could you also help confirm this?
I'm not strongly opiniated on the usage of the OS lock, hence being a little
nonchalent in the coresight-etmv4 driver.
>
> [...]
>
> > >+static void debug_init_arch_data(void *info)
> > >+{
> > >+ struct debug_drvdata *drvdata = info;
> > >+ u32 mode, pcsr_offset;
> > >+
> > >+ CS_UNLOCK(drvdata->base);
> > >+
> > >+ debug_os_unlock(drvdata);
> > >+
> > >+ /* Read device info */
> > >+ drvdata->eddevid = readl_relaxed(drvdata->base + EDDEVID);
> > >+ drvdata->eddevid1 = readl_relaxed(drvdata->base + EDDEVID1);
> >
> > As mentioned above, both of these registers are only need at init time to
> > figure out the flags we set here. So we could remove them.
> >
> > >+
> > >+ CS_LOCK(drvdata->base);
> > >+
> > >+ /* Parse implementation feature */
> > >+ mode = drvdata->eddevid & EDDEVID_PCSAMPLE_MODE;
> > >+ pcsr_offset = drvdata->eddevid1 & EDDEVID1_PCSR_OFFSET_MASK;
> >
> >
> > >+
> > >+ if (mode == EDDEVID_IMPL_NONE) {
> > >+ drvdata->edpcsr_present = false;
> > >+ drvdata->edcidsr_present = false;
> > >+ drvdata->edvidsr_present = false;
> > >+ } else if (mode == EDDEVID_IMPL_EDPCSR) {
> > >+ drvdata->edpcsr_present = true;
> > >+ drvdata->edcidsr_present = false;
> > >+ drvdata->edvidsr_present = false;
> > >+ } else if (mode == EDDEVID_IMPL_EDPCSR_EDCIDSR) {
> > >+ if (!IS_ENABLED(CONFIG_64BIT) &&
> > >+ (pcsr_offset == EDDEVID1_PCSR_NO_OFFSET_DIS_AARCH32))
> > >+ drvdata->edpcsr_present = false;
> > >+ else
> > >+ drvdata->edpcsr_present = true;
> >
> > Sorry, I forgot why we do this check only in this mode. Shouldn't this be
> > common to all modes (of course which implies PCSR is present) ?
>
> No. PCSROffset is defined differently in ARMv7 and ARMv8; So finally we
> simplize PCSROffset value :
> 0000 - Sample offset applies based on the instruction state (indicated by PCSR[0])
> 0001 - No offset applies.
> 0010 - No offset applies, but do not use in AArch32 mode!
>
> So we need handle the corner case is when CPU runs AArch32 mode and
> PCSRoffset = 'b0010. Other cases the pcsr should be present.
>
> [...]
>
> Other suggestions are good for me, will take them in next version.
>
> Thanks,
> Leo Yan
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
