Re: [PATCH v5 6/9] coresight: add support for CPU debug module

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 29 March 2017 at 04:07, Leo Yan <leo.yan@xxxxxxxxxx> wrote:
> Hi Suzuki,
>
> On Mon, Mar 27, 2017 at 05:34:57PM +0100, Suzuki K Poulose wrote:
>> On 25/03/17 18:23, Leo Yan wrote:
>
> [...]
>
>> Leo,
>>
>> Thanks a lot for the quick rework. I don't fully understand (yet!) why we need the
>> idle_constraint. I will leave it for Sudeep to comment on it, as he is the expert
>> in that area. Some minor comments below.
>
> Thanks a lot for quick reviewing :)
>
>> >Signed-off-by: Leo Yan <leo.yan@xxxxxxxxxx>
>> >---
>> > drivers/hwtracing/coresight/Kconfig               |  11 +
>> > drivers/hwtracing/coresight/Makefile              |   1 +
>> > drivers/hwtracing/coresight/coresight-cpu-debug.c | 704 ++++++++++++++++++++++
>> > 3 files changed, 716 insertions(+)
>> > create mode 100644 drivers/hwtracing/coresight/coresight-cpu-debug.c
>> >
>> >diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
>> >index 130cb21..18d7931 100644
>> >--- a/drivers/hwtracing/coresight/Kconfig
>> >+++ b/drivers/hwtracing/coresight/Kconfig
>> >@@ -89,4 +89,15 @@ config CORESIGHT_STM
>> >       logging useful software events or data coming from various entities
>> >       in the system, possibly running different OSs
>> >
>> >+config CORESIGHT_CPU_DEBUG
>> >+    tristate "CoreSight CPU Debug driver"
>> >+    depends on ARM || ARM64
>> >+    depends on DEBUG_FS
>> >+    help
>> >+      This driver provides support for coresight debugging module. This
>> >+      is primarily used to dump sample-based profiling registers when
>> >+      system triggers panic, the driver will parse context registers so
>> >+      can quickly get to know program counter (PC), secure state,
>> >+      exception level, etc.
>>
>> May be we should mention/warn the user about the possible caveats of using
>> this feature to help him make a better decision ? And / Or we should add a documentation
>> for it. We have collected some real good information over the discussions and
>> it is a good idea to capture it somewhere.
>
> Sure, I will add a documentation for this.
>
> [...]
>
>> >+static struct pm_qos_request debug_qos_req;
>> >+static int idle_constraint = PM_QOS_DEFAULT_VALUE;
>> >+module_param(idle_constraint, int, 0600);
>> >+MODULE_PARM_DESC(idle_constraint, "Latency requirement in microseconds for CPU "
>> >+             "idle states (default is -1, which means have no limiation "
>> >+             "to CPU idle states; 0 means disabling all idle states; user "
>> >+             "can choose other platform dependent values so can disable "
>> >+             "specific idle states for the platform)");
>>
>> Correct me if I am wrong,
>>
>> All we want to do is disable the CPUIdle explicitly if the user knows that this
>> could be a problem to use CPU debug on his platform. So, in effect, we should
>> only be using idle_constraint = 0 or -1.
>>
>> In which case, we could make it easier for the user to tell us, either
>>
>>  0 - Don't do anything with CPUIdle (default)
>>  1 - Disable CPUIdle for me as I know the platform has issues with CPU debug and CPUidle.
>
> The reason for not using bool flag is: usually SoC may have many idle
> states, so if user wants to partially enable some states then can set
> the latency to constraint.
>
> But of course, we can change this to binary value as you suggested,
> this means turn on of turn off all states. The only one reason to use
> latency value is it is more friendly for hardware design, e.g. some
> platforms can enable partial states to save power and avoid overheat
> after using this driver.
>
> If you guys think this is a bit over design, I will follow up your
> suggestion. I also have some replying in Mathieu's reviewing, please
> help review as well.
>
>> than explaining the miscrosecond latency etc and make the appropriate calls underneath.
>> something like (not necessarily the same name) :
>>
>> module_param(broken_with_cpuidle, bool, 0600);
>> MODULE_PARAM_DESC(broken_with_cpuidle, "Specifies whether the CPU debug has issues with CPUIdle on"
>>                                      " the platform. Non-zero value implies CPUIdle has to be"
>>                                      " explicitly disabled.",);
>
> [...]
>
>> >+    /*
>> >+     * Unfortunately the CPU cannot be powered up, so return
>> >+     * back and later has no permission to access other
>> >+     * registers. For this case, should set 'idle_constraint'
>> >+     * to ensure CPU power domain is enabled!
>> >+     */
>> >+    if (!(drvdata->edprsr & EDPRSR_PU)) {
>> >+            pr_err("%s: power up request for CPU%d failed\n",
>> >+                    __func__, drvdata->cpu);
>> >+            goto out;
>> >+    }
>> >+
>> >+out_powered_up:
>> >+    debug_os_unlock(drvdata);
>>
>> Question: Do we need a matching debug_os_lock() once we are done ?
>
> I have checked ARM ARMv8, but there have no detailed description for
> this. I refered coresight-etmv4 code and Mike's pseudo code, ther have
> no debug_os_lock() related operations.
>
> Mike, Mathieu, could you also help confirm this?
>

Debug OS lock / unlock allows the power management code running on the
core to lock out the external debugger while the debug registers are
saved/restored during a core power event.

e.g. A sequence such as this might occur in a correctly programmed system....

debug_os_lock()
save_debug_regs() // visible from core power domain - incl breakpoints etc
save_etm_regs()
... // other stuff prior to core power down,
<power_down_core>

Followed by...

<power_up_core>
restore_etm_regs()
restore_debug_regs() // visible from core power domain - incl breakpoints etc
debug_os_unlock()

The value is 1 (locked) if cold resetting into AArch64 - it is
expected that some system software will set this to 0 as part of the
boot process.
The lock prevents write access to the external debug registers so we
need to clear it to set up the external debug registers we are using.
This suggests that it should be restored as we found it when done.

Mike

> [...]
>
>> >+static void debug_init_arch_data(void *info)
>> >+{
>> >+    struct debug_drvdata *drvdata = info;
>> >+    u32 mode, pcsr_offset;
>> >+
>> >+    CS_UNLOCK(drvdata->base);
>> >+
>> >+    debug_os_unlock(drvdata);
>> >+
>> >+    /* Read device info */
>> >+    drvdata->eddevid  = readl_relaxed(drvdata->base + EDDEVID);
>> >+    drvdata->eddevid1 = readl_relaxed(drvdata->base + EDDEVID1);
>>
>> As mentioned above, both of these registers are only need at init time to
>> figure out the flags we set here. So we could remove them.
>>
>> >+
>> >+    CS_LOCK(drvdata->base);
>> >+
>> >+    /* Parse implementation feature */
>> >+    mode = drvdata->eddevid & EDDEVID_PCSAMPLE_MODE;
>> >+    pcsr_offset = drvdata->eddevid1 & EDDEVID1_PCSR_OFFSET_MASK;
>>
>>
>> >+
>> >+    if (mode == EDDEVID_IMPL_NONE) {
>> >+            drvdata->edpcsr_present  = false;
>> >+            drvdata->edcidsr_present = false;
>> >+            drvdata->edvidsr_present = false;
>> >+    } else if (mode == EDDEVID_IMPL_EDPCSR) {
>> >+            drvdata->edpcsr_present  = true;
>> >+            drvdata->edcidsr_present = false;
>> >+            drvdata->edvidsr_present = false;
>> >+    } else if (mode == EDDEVID_IMPL_EDPCSR_EDCIDSR) {
>> >+            if (!IS_ENABLED(CONFIG_64BIT) &&
>> >+                    (pcsr_offset == EDDEVID1_PCSR_NO_OFFSET_DIS_AARCH32))
>> >+                    drvdata->edpcsr_present = false;
>> >+            else
>> >+                    drvdata->edpcsr_present = true;
>>
>> Sorry, I forgot why we do this check only in this mode. Shouldn't this be
>> common to all modes (of course which implies PCSR is present) ?
>
> No. PCSROffset is defined differently in ARMv7 and ARMv8; So finally we
> simplize PCSROffset value :
> 0000 - Sample offset applies based on the instruction state (indicated by PCSR[0])
> 0001 - No offset applies.
> 0010 - No offset applies, but do not use in AArch32 mode!
>
> So we need handle the corner case is when CPU runs AArch32 mode and
> PCSRoffset = 'b0010. Other cases the pcsr should be present.
>
> [...]
>
> Other suggestions are good for me, will take them in next version.
>
> Thanks,
> Leo Yan



-- 
Mike Leach
Principal Engineer, ARM Ltd.
Blackburn Design Centre. UK
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux