On 2016-10-12 3:30 AM, Mark Rutland wrote:
On Wed, Oct 12, 2016 at 02:37:28AM -0700, Jeremy McNicoll wrote:+/ { + model = "LGE MSM8992 BULLHEAD rev-1.01"; + compatible = "qcom,msm8992"; + qcom,board-id = <0xb64 0>; +};This last property doesn't seem to be documented or used in mainline. What is it for?
Its required by the bootloader to select the correct blob.
+/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + };I'd recommend describing the configured rate, per Documentation/devicetree/bindings/chosen.txt
Updated default serial settings have been changed as per V3 6/7 and the associated patch dropped. (6/7)
[...]+/ { + model = "Qualcomm Technologies, Inc. MSM 8992"; + compatible = "qcom,msm8992"; + qcom,msm-id = <251 0>, <252 0>; + qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;These last two are not documented, and not used in mainline. What are they for?
They are explicitly needed by the bootloader.
+ memory { + #address-cells = <2>; + #size-cells = <2>; + + device_type = "memory"; + reg = <0 0 0 0>;If this is filled in by the bootloader, please havea coment to that effect.
added comment
+ peripheral_mem: peripheral_region@0 { + linux,reserve-contiguous-region; + linux,reserve-region; + linux,remove-completely; + reg = <0 0x07400000 0 0x1c00000>; + label = "peripheral_mem"; + }; + };What is this? There aren't any sub-nodes of memory (iirc reserved-memory is a separate node), an none of these 'liux,' prefixed properties exist in mainline.
dropped as its a relic of the past. (3.10)
[...]+ timer { + compatible = "arm,armv8-timer"; + interrupts = <1 2 0xf08>, + <1 3 0xf08>, + <1 4 0xf08>, + <1 1 0xf08>; + clock-frequency = <19200000>; + };Why is the FW not programming the frequency register?
Not sure what the FW is doing as I don't have access to it.
+ clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + };Get rid of the clocks container node, and places these directly under the root node.
moved up, waaay up! -jeremy
Thanks, Mark.
-- To unsubscribe from this list: send the line "unsubscribe linux-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
