Here is the complete V3 series including the individual changes that have already been sent based on feedback from V2. V1 overview, [http://lists.infradead.org/pipermail/linux-arm-kernel/2016-July/442069.html] V2 overview, [http://www.spinics.net/lists/devicetree/msg144761.html] Testing: -only on Nexus 5X as I still don't have a Nexus 6P and no one has yet to donate one for testing. ;-( Changes from V2->V3: -squashed down changes which originally created Huawei directory, everything is now in qcom dir. -put msm-id, pmic-id and board-id back in to original DTS files msm899(2/4) [V1]. -changed gcc mappings, heres a description of what changed: "The paren_map is used for looking up which value to write into and the cmd_rcgr is for configuring the parent muxing so a change 2 to 5 means that the 3rd parent should be mux #5 rather than #2." [http://www.spinics.net/lists/devicetree/msg144764.html] -dt bindings in Documentation dir re-ordered (sorted). -squashed patch which was removing defconfig into initial support of 8994 (Nexus 6P) -updated defconfig to only include BLK_DEV_RAM and added pinctrl for basic serial -grouped / squashed all defconfig items into 1 change / patch TODO: -As I still dont have a Nexus 6P for testing, the reserved memory "/memreserve/" is still present. The plan is to remove it or create the reserved mem dt. One outstanding question is "What is the difference between msm8994 and msm8994v2 ?" hopefully someone from QC can provide an explanation. Comments and feedback greatly appreciated. Bastian Köcher (2): msm8994 clocks: global clock support Global clock support for the msm8994 SOC. arm64: dts: msm8994 SoC and Huawei Angler (Nexus 6P) support Jeremy McNicoll (5): arm64: dts: msm8992 SoC and LG Bullhead (Nexus 5X) support dt-bindings: qcom: Add msm899(2/4) bindings arm64: dts: msm8992 default serial config arm64: dts: msm8994 default serial config arm64: configs: enable configs for msm899(2/4) basic support Documentation/devicetree/bindings/arm/qcom.txt | 3 + .../devicetree/bindings/clock/qcom,gcc.txt | 2 + arch/arm64/boot/dts/Makefile | 1 + arch/arm64/boot/dts/qcom/Makefile | 4 +- .../boot/dts/qcom/msm8992-bullhead-rev-101.dts | 41 + arch/arm64/boot/dts/qcom/msm8992-pins.dtsi | 38 + arch/arm64/boot/dts/qcom/msm8992.dtsi | 220 ++ .../arm64/boot/dts/qcom/msm8994-angler-rev-101.dts | 41 + arch/arm64/boot/dts/qcom/msm8994-pins.dtsi | 38 + arch/arm64/boot/dts/qcom/msm8994-v2.0.dtsi | 31 + arch/arm64/boot/dts/qcom/msm8994.dtsi | 237 ++ arch/arm64/configs/defconfig | 3 + drivers/clk/qcom/Kconfig | 9 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/gcc-msm8994.c | 2501 ++++++++++++++++++++ include/dt-bindings/clock/qcom,gcc-msm8994.h | 145 ++ 16 files changed, 3313 insertions(+), 2 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8992-pins.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8992.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8994-pins.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8994-v2.0.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8994.dtsi create mode 100644 drivers/clk/qcom/gcc-msm8994.c create mode 100644 include/dt-bindings/clock/qcom,gcc-msm8994.h -- 2.6.1 -- To unsubscribe from this list: send the line "unsubscribe linux-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
