This patch adds defines for internal voltage regulators used to switch voltage levels on gpio/mpp pads. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> --- include/dt-bindings/pinctrl/qcom,pmic-gpio.h | 4 ++++ include/dt-bindings/pinctrl/qcom,pmic-mpp.h | 6 ++++++ 2 files changed, 10 insertions(+) diff --git a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h index aafa76c..d33f17c 100644 --- a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h +++ b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h @@ -89,6 +89,10 @@ #define PMA8084_GPIO_S4 2 #define PMA8084_GPIO_L6 3 +#define PM8994_GPIO_VPH 0 +#define PM8994_GPIO_S4 2 +#define PM8994_GPIO_L12 3 + /* To be used with "function" */ #define PMIC_GPIO_FUNC_NORMAL "normal" #define PMIC_GPIO_FUNC_PAIRED "paired" diff --git a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h index a15c170..2e360d8f 100644 --- a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h +++ b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h @@ -65,6 +65,12 @@ #define PMA8084_MPP_S4 2 #define PMA8084_MPP_L6 3 +#define PM8994_MPP_VPH 0 +/* Only supported for MPP_05-MPP_08 */ +#define PM8994_MPP_L19 1 +#define PM8994_MPP_S4 2 +#define PM8994_MPP_L12 3 + /* * Analog Input - Set the source for analog input. * To be used with "qcom,amux-route" property -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
