This patch adds pmic specific dts which are configured specially
for db820c. One of such pin is GPIO_F on the Low Speed expansion
which has default output voltage of 2.7v. This patch fixes setup
for that pin to have an output voltage of 1.8v to comply with
96boards LS expansion specs.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi | 15 +++++++++++++++
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 2 ++
2 files changed, 17 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
new file mode 100644
index 0000000..0938191
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
@@ -0,0 +1,15 @@
+
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+&pm8994_gpios {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ls_exp_gpio_f>;
+
+ ls_exp_gpio_f: pm8916_mpp4 {
+ pinconf {
+ pins = "gpio5";
+ output-low;
+ power-source = <PM8994_GPIO_S4>; // 1.8V
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index afb218c..422959b 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -12,7 +12,9 @@
*/
#include "msm8996.dtsi"
+#include "pm8994.dtsi"
#include "apq8096-db820c-pins.dtsi"
+#include "apq8096-db820c-pmic-pins.dtsi"
/ {
aliases {
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
