This patch adds TCSR support for use by the GSBI to automatically configure ADM
CRCI values based on the GSBI port configuration.
Signed-off-by: Andy Gross <agross@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 63b2146..d3643fe 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -120,6 +120,7 @@
gsbi2: gsbi@12480000 {
compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <2>;
reg = <0x12480000 0x100>;
clocks = <&gcc GSBI2_H_CLK>;
clock-names = "iface";
@@ -128,6 +129,8 @@
ranges;
status = "disabled";
+ syscon-tcsr = <&tcsr>;
+
serial@12490000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x12490000 0x1000>,
@@ -155,6 +158,7 @@
gsbi4: gsbi@16300000 {
compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <4>;
reg = <0x16300000 0x100>;
clocks = <&gcc GSBI4_H_CLK>;
clock-names = "iface";
@@ -163,6 +167,8 @@
ranges;
status = "disabled";
+ syscon-tcsr = <&tcsr>;
+
serial@16340000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16340000 0x1000>,
@@ -189,6 +195,7 @@
gsbi5: gsbi@1a200000 {
compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <5>;
reg = <0x1a200000 0x100>;
clocks = <&gcc GSBI5_H_CLK>;
clock-names = "iface";
@@ -197,6 +204,8 @@
ranges;
status = "disabled";
+ syscon-tcsr = <&tcsr>;
+
serial@1a240000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x1a240000 0x1000>,
@@ -279,5 +288,10 @@
#clock-cells = <1>;
#reset-cells = <1>;
};
+
+ tcsr: syscon@1a400000 {
+ compatible = "qcom,tcsr-ipq8064", "syscon";
+ reg = <0x1a400000 0x100>;
+ };
};
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
