This patch adds TCSR support for use by the GSBI to automatically configure ADM
CRCI values based on the GSBI port configuration.
Signed-off-by: Andy Gross <agross@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index b3154c0..f607900 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -166,6 +166,7 @@
gsbi1: gsbi@12440000 {
status = "disabled";
compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <1>;
reg = <0x12440000 0x100>;
clocks = <&gcc GSBI1_H_CLK>;
clock-names = "iface";
@@ -173,6 +174,8 @@
#size-cells = <1>;
ranges;
+ syscon-tcsr = <&tcsr>;
+
i2c1: i2c@12460000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x12460000 0x1000>;
@@ -187,6 +190,7 @@
gsbi2: gsbi@12480000 {
status = "disabled";
compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <2>;
reg = <0x12480000 0x100>;
clocks = <&gcc GSBI2_H_CLK>;
clock-names = "iface";
@@ -194,6 +198,8 @@
#size-cells = <1>;
ranges;
+ syscon-tcsr = <&tcsr>;
+
i2c2: i2c@124a0000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x124a0000 0x1000>;
@@ -208,6 +214,7 @@
gsbi7: gsbi@16600000 {
status = "disabled";
compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <7>;
reg = <0x16600000 0x100>;
clocks = <&gcc GSBI7_H_CLK>;
clock-names = "iface";
@@ -215,6 +222,8 @@
#size-cells = <1>;
ranges;
+ syscon-tcsr = <&tcsr>;
+
serial@16640000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16640000 0x1000>,
@@ -349,5 +358,10 @@
pinctrl-0 = <&sdc4_gpios>;
};
};
+
+ tcsr: syscon@1a400000 {
+ compatible = "qcom,tcsr-apq8064", "syscon";
+ reg = <0x1a400000 0x100>;
+ };
};
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
