Re: [PATCH V3 07/15] arch/kunmap_atomic: Consolidate duplicate code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 18, 2020 at 07:50:36PM -0700, Guenter Roeck wrote:
> Hi Ira,
> 
> On 5/18/20 5:03 PM, Ira Weiny wrote:
> > On Sun, May 17, 2020 at 09:29:32PM -0700, Guenter Roeck wrote:
> >> On Sun, May 17, 2020 at 08:49:39PM -0700, Ira Weiny wrote:
> >>> On Sat, May 16, 2020 at 03:33:06PM -0700, Guenter Roeck wrote:
> >>>> On Thu, May 07, 2020 at 07:59:55AM -0700, ira.weiny@xxxxxxxxx wrote:
> >>>>> From: Ira Weiny <ira.weiny@xxxxxxxxx>
> >>>>>
> >>>

Sorry for the delay I missed this email last night...  I blame outlook...  ;-)

...

> >>> Do you have a kernel config?  Specifically is CONFIG_HIGHMEM set?
> >>>
> >> See below. Yes, CONFIG_HIGHMEM is set.
> >>
> >> The scripts used to build and boot the image are at:
> >>
> >> https://github.com/groeck/linux-build-test/tree/master/rootfs/microblazeel
> > 
> > Despite finding the obvious error earlier today I've still been trying to get
> > this to work.
> > 
> > I had to make some slight modifications to use the 0-day cross compile build
> > and my local qemu build.  But those were pretty minor modifications.  I'm
> > running on x86_64 host.
> > 
> > With those slight mods to the scripts I get the following error even without my
> > patch set on 5.7-rc4.  I have 1 cpu pegged at 100% while it is running...  Is
> > there anything I can do to get more debug output?  Perhaps I just need to let
> > it run longer?
> > 
> 
> I don't think so. Try running it with "-d" parameter (run-qemu-microblazeel.sh
> -d petalogix-s3adsp1800); that gives you the qemu command line. Once it says
> "running", abort the script and execute qemu directly.

FYI Minor nit...  a simple copy/paste failed...  that print of the cmd line
did not include quotes around the -append text:

09:06:03 > /home/iweiny/dev/qemu/microblazeel-softmmu/qemu-system-microblazeel
   -M petalogix-s3adsp1800 -m 256 -kernel arch/microblaze/boot/linux.bin
   -no-reboot -initrd /tmp/buildbot-cache/microblazeel/rootfs.cpio -append
   panic=-1 slub_debug=FZPUA rdinit=/sbin/init console=ttyUL0,115200 -monitor
   none -serial stdio -nographic

qemu-system-microblazeel: slub_debug=FZPUA: Could not open 'slub_debug=FZPUA': No such file or directory

> Oh, and please update
> the repository; turns out I didn't push for a while and made a number of
> changes.

Cool beans...  I've updated.

> 
> My compiler was compiled with buildroot (a long time ago). I don't recall if
> it needed something special in the configuration, unfortunately.

AFAICT the compile is working...  It is running from the command line now...  I
expected it to be slow so I have also increased the timeouts last night.  So
far it still fails.  I did notice that there is a new 'R' in the wait output.

<quote>
.........................R......................... failed (silent)
------------
qemu log:
qemu-system-microblazeel: terminating on signal 15 from pid 3357146 (/bin/bash)
</quote>

I was hoping that meant it found qemu 'running' but looks like that was just a
retry...  :-(

Last night I increased some of the timeouts I could find.

<quote>
 LOOPTIME=5     # Wait time before checking status
 -MAXTIME=150    # Maximum wait time for qemu session to complete
 -MAXSTIME=60    # Maximum wait time for qemu session to generate output
 +#MAXTIME=150   # Maximum wait time for qemu session to complete
 +#MAXSTIME=60   # Maximum wait time for qemu session to generate output
 +MAXTIME=300    # Maximum wait time for qemu session to complete
 +MAXSTIME=120   # Maximum wait time for qemu session to generate output
</quote>

But thanks to the qemu command line hint I can see these were not nearly
enough...  (It has been running for > 20 minutes...  and I'm not getting
output...)  Or I've done something really wrong.  Shouldn't qemu be at least
showing something on the terminal by now?  I normally run qemu with different
display options (and my qemu foo is weak) so I'm not sure what I should be
seeing with this command line.

09:06:28 > /home/iweiny/dev/qemu/microblazeel-softmmu/qemu-system-microblazeel
  -M petalogix-s3adsp1800 -m 256 -kernel arch/microblaze/boot/linux.bin
  -no-reboot -initrd /tmp/buildbot-cache/microblazeel/rootfs.cpio -append
  "panic=-1 slub_debug=FZPUA rdinit=/sbin/init console=ttyUL0,115200" -monitor
  none -serial stdio -nographic

Maybe I just have too slow of a machine...  :-/

My qemu was built back in March.  I'm updating that now...

Sorry for being so dense...
Ira

_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-snps-arc



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux