Re: [PATCH V3 07/15] arch/kunmap_atomic: Consolidate duplicate code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, May 17, 2020 at 09:29:32PM -0700, Guenter Roeck wrote:
> On Sun, May 17, 2020 at 08:49:39PM -0700, Ira Weiny wrote:
> > On Sat, May 16, 2020 at 03:33:06PM -0700, Guenter Roeck wrote:
> > > On Thu, May 07, 2020 at 07:59:55AM -0700, ira.weiny@xxxxxxxxx wrote:
> > > > From: Ira Weiny <ira.weiny@xxxxxxxxx>
> > > > 
> > > > Every single architecture (including !CONFIG_HIGHMEM) calls...
> > > > 
> > > > 	pagefault_enable();
> > > > 	preempt_enable();
> > > > 
> > > > ... before returning from __kunmap_atomic().  Lift this code into the
> > > > kunmap_atomic() macro.
> > > > 
> > > > While we are at it rename __kunmap_atomic() to kunmap_atomic_high() to
> > > > be consistent.
> > > > 
> > > > Reviewed-by: Christoph Hellwig <hch@xxxxxx>
> > > > Signed-off-by: Ira Weiny <ira.weiny@xxxxxxxxx>
> > > 
> > > This patch results in:
> > > 
> > > Starting init: /bin/sh exists but couldn't execute it (error -14)
> > > 
> > > when trying to boot microblazeel:petalogix-ml605 in qemu.
> > 
> > Thanks for the report.  I'm not readily seeing the issue.
> > 
> > Do you have a kernel config?  Specifically is CONFIG_HIGHMEM set?
> > 
> See below. Yes, CONFIG_HIGHMEM is set.
> 
> The scripts used to build and boot the image are at:
> 
> https://github.com/groeck/linux-build-test/tree/master/rootfs/microblazeel

Despite finding the obvious error earlier today I've still been trying to get
this to work.

I had to make some slight modifications to use the 0-day cross compile build
and my local qemu build.  But those were pretty minor modifications.  I'm
running on x86_64 host.

With those slight mods to the scripts I get the following error even without my
patch set on 5.7-rc4.  I have 1 cpu pegged at 100% while it is running...  Is
there anything I can do to get more debug output?  Perhaps I just need to let
it run longer?

Thanks,
Ira

16:46:54 > ../linux-build-test/rootfs/microblazeel/run-qemu-microblazeel.sh 
Build reference: v5.7-rc4-2-g7c2411d7fb6a

Building microblaze:petalogix-s3adsp1800:qemu_microblazeel_defconfig ...
running ................ failed (silent)
------------
qemu log:
qemu-system-microblazeel: terminating on signal 15 from pid 3277686 (/bin/bash)
------------
Building microblaze:petalogix-ml605:qemu_microblazeel_ml605_defconfig ...
running ................ failed (silent)
------------
qemu log:
qemu-system-microblazeel: terminating on signal 15 from pid 3277686 (/bin/bash)
------------

<env changes>
16:47:23 > git di
diff --git a/rootfs/microblazeel/run-qemu-microblazeel.sh b/rootfs/microblazeel/run-qemu-microblazeel.sh
index 68d4de39ab50..0d6a4f85308f 100755
--- a/rootfs/microblazeel/run-qemu-microblazeel.sh
+++ b/rootfs/microblazeel/run-qemu-microblazeel.sh
@@ -3,7 +3,8 @@
 dir=$(cd $(dirname $0); pwd)
 . ${dir}/../scripts/common.sh
 
-QEMU=${QEMU:-${QEMU_BIN}/qemu-system-microblazeel}
+#QEMU=${QEMU:-${QEMU_BIN}/qemu-system-microblazeel}
+QEMU=/home/iweiny/dev/qemu/microblazeel-softmmu/qemu-system-microblazeel
 PREFIX=microblazeel-linux-
 ARCH=microblaze
 PATH_MICROBLAZE=/opt/kernel/microblazeel/gcc-4.9.1/usr/bin
diff --git a/rootfs/scripts/common.sh b/rootfs/scripts/common.sh
index 8fa6a9be2b2f..c4550a27beaa 100644
--- a/rootfs/scripts/common.sh
+++ b/rootfs/scripts/common.sh
@@ -1,5 +1,9 @@
 #!/bin/bash
 
+# Set up make.cross
+export COMPILER_INSTALL_PATH=$HOME/0day
+export GCC_VERSION=6.5.0
+
 # Set the following variable to true to skip DC395/AM53C97 build tests
 __skip_dc395=0
 
@@ -569,7 +573,7 @@ doclean()
        then
                git clean -x -d -f -q
        else
-               make ARCH=${ARCH} mrproper >/dev/null 2>&1
+               make.cross ARCH=${ARCH} mrproper >/dev/null 2>&1
        fi
 }
 
@@ -669,7 +673,7 @@ __setup_config()
        cp ${__progdir}/${defconfig} arch/${arch}/configs
     fi
 
-    if ! make ARCH=${ARCH} CROSS_COMPILE=${PREFIX} ${defconfig} >/dev/null 2>&1 </dev/null; then
+    if ! make.cross ARCH=${ARCH} ${defconfig} >/dev/null 2>&1 </dev/null; then
        return 2
     fi
 
@@ -687,7 +691,7 @@ __setup_config()
        if [[ "${rel}" = "v3.16" ]]; then
            target="oldconfig"
        fi
-       if ! make ARCH=${ARCH} CROSS_COMPILE=${PREFIX} ${target} >/dev/null 2>&1 </dev/null; then
+       if ! make.cross ARCH=${ARCH} ${target} >/dev/null 2>&1 </dev/null; then
            return 1
        fi
     fi
@@ -1038,7 +1042,7 @@ dosetup()
     rootfs="$(setup_rootfs ${dynamic} ${rootfs})"
     __common_fixups "${fixups}" "${rootfs}"
 
-    make -j${maxload} ARCH=${ARCH} CROSS_COMPILE=${PREFIX} ${EXTRAS} </dev/null >/dev/null 2>${logfile}
+    make.cross -j${maxload} ARCH=${ARCH} ${EXTRAS} </dev/null >/dev/null 2>${logfile}
     rv=$?
     if [ ${rv} -ne 0 ]
     then

</env changes>

_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-snps-arc



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux