From: Inochi Amaoto <inochiama@xxxxxxxxx> [ Upstream commit cad4dda82c7eedcfc22597267e710ccbcf39d572 ] SG2044 relys on an internal divisor when calculating bitrate, which means a wrong clock for the most common bitrates. So add a quirk for this uart device to skip the set rate call and only relys on the internal UART divisor. Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> Signed-off-by: Inochi Amaoto <inochiama@xxxxxxxxx> Link: https://lore.kernel.org/r/20241024062105.782330-4-inochiama@xxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/tty/serial/8250/8250_dw.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index a1f2259cc9a98..72f9aab75ab12 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -770,7 +770,7 @@ static const struct dw8250_platform_data dw8250_renesas_rzn1_data = { .quirks = DW_UART_QUIRK_IS_DMA_FC, }; -static const struct dw8250_platform_data dw8250_starfive_jh7100_data = { +static const struct dw8250_platform_data dw8250_skip_set_rate_data = { .usr_reg = DW_UART_USR, .quirks = DW_UART_QUIRK_SKIP_SET_RATE, }; @@ -780,7 +780,8 @@ static const struct of_device_id dw8250_of_match[] = { { .compatible = "cavium,octeon-3860-uart", .data = &dw8250_octeon_3860_data }, { .compatible = "marvell,armada-38x-uart", .data = &dw8250_armada_38x_data }, { .compatible = "renesas,rzn1-uart", .data = &dw8250_renesas_rzn1_data }, - { .compatible = "starfive,jh7100-uart", .data = &dw8250_starfive_jh7100_data }, + { .compatible = "sophgo,sg2044-uart", .data = &dw8250_skip_set_rate_data }, + { .compatible = "starfive,jh7100-uart", .data = &dw8250_skip_set_rate_data }, { /* Sentinel */ } }; MODULE_DEVICE_TABLE(of, dw8250_of_match); -- 2.43.0
