Function pl011_throttle_rx() calls pl011_stop_rx() to disable RX, which
also disables the RX DMA by clearing the RXDMAE bit of the DMACR
register. However, to properly unthrottle RX when DMA is used, the
function pl011_unthrottle_rx() is expected to set the RXDMAE bit of
the DMACR register, which it currently lacks. This causes RX to stall
after the throttle API is called.
Set RXDMAE bit in the DMACR register while unthrottling RX if RX DMA is
used.
Fixes: 211565b10099 ("serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle")
Signed-off-by: Kartik <kkartik@xxxxxxxxxx>
---
drivers/tty/serial/amba-pl011.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 4c4b0d470c65..f40714685166 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1819,6 +1819,11 @@ static void pl011_unthrottle_rx(struct uart_port *port)
pl011_write(uap->im, uap, REG_IMSC);
+ if (uap->using_rx_dma) {
+ uap->dmacr |= UART011_RXDMAE;
+ pl011_write(uap->dmacr, uap, REG_DMACR);
+ }
+
uart_port_unlock_irqrestore(&uap->port, flags);
}
--
2.47.0
