SG2044 relys on an internal divisor when calculating bitrate, which
means a wrong clock for the most common bitrates. So add a quirk for
this uart device to skip the set rate call and only relys on the
internal UART divisor.
Signed-off-by: Inochi Amaoto <inochiama@xxxxxxxxx>
---
drivers/tty/serial/8250/8250_dw.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index ab9e7f204260..51894c93c8a3 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -750,7 +750,7 @@ static const struct dw8250_platform_data dw8250_renesas_rzn1_data = {
.quirks = DW_UART_QUIRK_CPR_VALUE | DW_UART_QUIRK_IS_DMA_FC,
};
-static const struct dw8250_platform_data dw8250_starfive_jh7100_data = {
+static const struct dw8250_platform_data dw8250_skip_set_rate_data = {
.usr_reg = DW_UART_USR,
.quirks = DW_UART_QUIRK_SKIP_SET_RATE,
};
@@ -760,7 +760,8 @@ static const struct of_device_id dw8250_of_match[] = {
{ .compatible = "cavium,octeon-3860-uart", .data = &dw8250_octeon_3860_data },
{ .compatible = "marvell,armada-38x-uart", .data = &dw8250_armada_38x_data },
{ .compatible = "renesas,rzn1-uart", .data = &dw8250_renesas_rzn1_data },
- { .compatible = "starfive,jh7100-uart", .data = &dw8250_starfive_jh7100_data },
+ { .compatible = "sophgo,sg2044-uart", .data = &dw8250_skip_set_rate_data },
+ { .compatible = "starfive,jh7100-uart", .data = &dw8250_skip_set_rate_data },
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, dw8250_of_match);
--
2.47.0
