The following changes since commit 47ac09b91befbb6a235ab620c32af719f8208399:
Linux 6.11-rc4 (2024-08-18 13:17:27 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tags/tty-6.12-rc1
for you to fetch changes up to 5ed771f174726ae879945d4f148a9005ac909cb7:
tty: serial: samsung: Fix serial rx on Apple A7-A9 (2024-09-11 15:47:13 +0200)
----------------------------------------------------------------
TTY/Serial driver update for 6.12-rc1
Here is the "big" set of tty/serial driver updates for 6.12-rc1.
Nothing major in here, just nice forward progress in the slow cleanup of
the serial apis, and lots of other driver updates and fixes.
Included in here are:
- serial api updates from Jiri to make things more uniform and sane
- 8250_platform driver cleanups
- samsung serial driver fixes and updates
- qcom-geni serial driver fixes from Johan for the bizarre UART engine
that that chip seems to have. Hopefully it's in a better state now,
but hardware designers still seem to come up with more ways to make
broken UARTS 40+ years after this all should have finished.
- sc16is7xx driver updates
- omap 8250 driver updates
- 8250_bcm2835aux driver updates
- a few new serial driver bindings added
- other serial minor driver updates
All of these have been in linux-next for a long time with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
----------------------------------------------------------------
André Draszik (4):
dt-bindings: serial: samsung: avoid duplicating permitted clock-names
dt-bindings: serial: samsung: fix maxItems for gs101
tty: serial: samsung_tty: drop unused argument to irq handlers
tty: serial: samsung_tty: cast the interrupt's void *id just once
Andy Shevchenko (8):
serial: 8250_platform: Remove duplicate mapping
serial: 8250_platform: Don't shadow error from serial8250_register_8250_port()
serial: 8250_platform: Use same check for ACPI in the whole driver
serial: 8250_platform: Tidy up ACPI ID table
serial: 8250_platform: Switch to use platform_get_mem_or_io()
serial: 8250_platform: Refactor serial8250_probe()
serial: 8250_platform: Unify comment style
serial: 8250_bcm2835aux: Switch to DEFINE_SIMPLE_DEV_PM_OPS()
Arnd Bergmann (2):
serial: 8250_platform: remove ACPI_PTR() annotation
serial: 8250_platform: fix uart_8250_port initializer
Chen Ni (2):
mxser: convert comma to semicolon
tty: hvc: convert comma to semicolon
Douglas Anderson (3):
soc: qcom: geni-se: add GP_LENGTH/IRQ_EN_SET/IRQ_EN_CLEAR registers
serial: qcom-geni: fix arg types for qcom_geni_serial_poll_bit()
serial: qcom-geni: introduce qcom_geni_serial_poll_bitfield()
Ferry Toth (1):
tty: serial: 8250_dma: use sgl with 2 nents to take care of buffer wrap
Florian Fainelli (1):
tty: rp2: Fix reset with non forgiving PCIe host bridges
Greg Kroah-Hartman (2):
Merge 6.11-rc3 into tty-next
Merge 6.11-rc4 into tty-next
Jinjie Ruan (1):
serial: xilinx_uartps: Make cdns_rs485_supported static
Jiri Slaby (SUSE) (15):
tty: simplify tty_dev_name_to_number() using guard(mutex)
serial: protect uart_port_dtr_rts() in uart_shutdown() too
serial: don't use uninitialized value in uart_poll_init()
serial: remove quot_frac from serial8250_do_set_divisor()
serial: use guards for simple mutex locks
mxser: remove stale comment
mxser: remove doubled sets of close times
xhci: dbgtty: remove kfifo_out() wrapper
xhci: dbgtty: use kfifo from tty_port struct
mctp: serial: propagage new tty types
6pack: remove sixpack::rbuff
6pack: drop sixpack::mtu
6pack: drop sixpack::buffsize
6pack: remove global strings
6pack: propagage new tty types
Jisheng Zhang (2):
serial: 8250: move mmp|pxa uart earlycon code
serial: 8250_early: add xscale earlycon support
Johan Hovold (5):
serial: qcom-geni: fix fifo polling timeout
serial: qcom-geni: fix false console tx restart
serial: qcom-geni: fix console corruption
serial: qcom-geni: disable interrupts during console writes
serial: qcom-geni: fix polled console corruption
Lech Perczak (3):
serial: sc16is7xx: remove SC16IS7XX_MSR_DELTA_MASK
serial: sc16is7xx: fix copy-paste errors in EFR_SWFLOWx_BIT constants
serial: sc16is7xx: convert bitmask definitions to use BIT() macro
Liao Chen (1):
serial: 8250_aspeed_vuart: Enable module autoloading
Markus Schneider-Pargmann (5):
dt-bindings: serial: 8250_omap: Add wakeup-source property
serial: 8250: omap: Remove unused wakeups_enabled
serial: 8250: omap: Cleanup on error in request_irq
serial: 8250: omap: Set wakeup capable, do not enable
serial: 8250: omap: Parse DT wakeup-source proerty
Nick Chan (3):
tty: serial: samsung: Use bit manipulation macros for APPLE_S5L_*
tty: serial: samsung: Fix A7-A11 serial earlycon SError
tty: serial: samsung: Fix serial rx on Apple A7-A9
Oliver Rhodes (1):
dt-bindings: serial: renesas: Document RZ/G2M v3.0 (r8a774a3) scif
Rafał Miłecki (2):
dt-bindings: serial: mediatek,uart: add MT7981
arm64: dts: mediatek: mt7981: add UART controllers
Raphael Gallais-Pou (1):
serial: st-asc: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
Rob Herring (Arm) (1):
serdev: Use of_property_present()
Stefan Wahren (2):
serial: 8250_bcm2835aux: add PM suspend/resume support
serial: 8250_bcm2835aux: Fix clock imbalance in PM resume
Sunil V L (1):
serial: 8250_platform: Enable generic 16550A platform devices
Varshini Rajendran (1):
dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7.
.../devicetree/bindings/serial/8250_omap.yaml | 1 +
.../bindings/serial/atmel,at91-usart.yaml | 9 +-
.../devicetree/bindings/serial/mediatek,uart.yaml | 1 +
.../devicetree/bindings/serial/renesas,scif.yaml | 1 +
.../devicetree/bindings/serial/samsung_uart.yaml | 70 ++++++--
arch/arm64/boot/dts/mediatek/mt7981b.dtsi | 33 ++++
drivers/net/hamradio/6pack.c | 60 +++----
drivers/net/mctp/mctp-serial.c | 23 +--
drivers/tty/hvc/hvsi_lib.c | 2 +-
drivers/tty/mxser.c | 7 +-
drivers/tty/serdev/core.c | 2 +-
drivers/tty/serial/8250/8250_aspeed_vuart.c | 1 +
drivers/tty/serial/8250/8250_bcm2835aux.c | 47 ++++++
drivers/tty/serial/8250/8250_dma.c | 19 ++-
drivers/tty/serial/8250/8250_dwlib.c | 2 +-
drivers/tty/serial/8250/8250_early.c | 11 ++
drivers/tty/serial/8250/8250_exar.c | 2 +-
drivers/tty/serial/8250/8250_omap.c | 10 +-
drivers/tty/serial/8250/8250_pci.c | 2 +-
drivers/tty/serial/8250/8250_platform.c | 122 ++++++++++++--
drivers/tty/serial/8250/8250_port.c | 4 +-
drivers/tty/serial/8250/8250_pxa.c | 16 --
drivers/tty/serial/qcom_geni_serial.c | 133 ++++++++-------
drivers/tty/serial/rp2.c | 2 +-
drivers/tty/serial/samsung_tty.c | 51 +++---
drivers/tty/serial/sc16is7xx.c | 183 +++++++++++----------
drivers/tty/serial/serial_core.c | 142 +++++++---------
drivers/tty/serial/st-asc.c | 10 +-
drivers/tty/serial/xilinx_uartps.c | 2 +-
drivers/tty/tty_io.c | 11 +-
drivers/usb/host/xhci-dbgcap.h | 1 -
drivers/usb/host/xhci-dbgtty.c | 30 +---
include/linux/serial_8250.h | 2 +-
include/linux/serial_s3c.h | 24 +--
include/linux/soc/qcom/geni-se.h | 9 +
35 files changed, 621 insertions(+), 424 deletions(-)
