Re: [PATCH 1/8] tty: 8250_ingenic: Use devm_clk_get_enabled() helpers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Lei Liu,

Le jeudi 22 août 2024 à 11:39 +0800, Lei Liu a écrit :
> The devm_clk_get_enabled() helpers:
>     - call devm_clk_get()
>     - call clk_prepare_enable() and register what is needed in order
> to
>      call clk_disable_unprepare() when needed, as a managed resource.
> 
> This simplifies the code and avoids calls to clk_disable_unprepare().
> 
> Signed-off-by: Lei Liu <liulei.rjpt@xxxxxxxx>
> ---
>  drivers/tty/serial/8250/8250_ingenic.c | 26 +++---------------------
> --
>  1 file changed, 3 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/tty/serial/8250/8250_ingenic.c
> b/drivers/tty/serial/8250/8250_ingenic.c
> index a2783e38a2e3..5f8787309064 100644
> --- a/drivers/tty/serial/8250/8250_ingenic.c
> +++ b/drivers/tty/serial/8250/8250_ingenic.c
> @@ -274,44 +274,26 @@ static int ingenic_uart_probe(struct
> platform_device *pdev)
>  	if (!uart.port.membase)
>  		return -ENOMEM;
>  
> -	data->clk_module = devm_clk_get(&pdev->dev, "module");
> +	data->clk_module = devm_clk_get_enabled(&pdev->dev,
> "module");
>  	if (IS_ERR(data->clk_module))
>  		return dev_err_probe(&pdev->dev, PTR_ERR(data-
> >clk_module),
>  				     "unable to get module
> clock\n");
>  
> -	data->clk_baud = devm_clk_get(&pdev->dev, "baud");
> +	data->clk_baud = devm_clk_get_enabled(&pdev->dev, "baud");
>  	if (IS_ERR(data->clk_baud))
>  		return dev_err_probe(&pdev->dev, PTR_ERR(data-
> >clk_baud),
>  				     "unable to get baud clock\n");
>  
> -	err = clk_prepare_enable(data->clk_module);
> -	if (err) {
> -		dev_err(&pdev->dev, "could not enable module clock:
> %d\n", err);
> -		goto out;
> -	}
> -
> -	err = clk_prepare_enable(data->clk_baud);
> -	if (err) {
> -		dev_err(&pdev->dev, "could not enable baud clock:
> %d\n", err);
> -		goto out_disable_moduleclk;
> -	}
>  	uart.port.uartclk = clk_get_rate(data->clk_baud);
>  
>  	data->line = serial8250_register_8250_port(&uart);
>  	if (data->line < 0) {
>  		err = data->line;
> -		goto out_disable_baudclk;
> +		return err;

Not really worth a V2, but if you make a V2, please "return data-
>line;" directly.

Acked-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>

Cheers,
-Paul

>  	}
>  
>  	platform_set_drvdata(pdev, data);
>  	return 0;
> -
> -out_disable_baudclk:
> -	clk_disable_unprepare(data->clk_baud);
> -out_disable_moduleclk:
> -	clk_disable_unprepare(data->clk_module);
> -out:
> -	return err;
>  }
>  
>  static void ingenic_uart_remove(struct platform_device *pdev)
> @@ -319,8 +301,6 @@ static void ingenic_uart_remove(struct
> platform_device *pdev)
>  	struct ingenic_uart_data *data = platform_get_drvdata(pdev);
>  
>  	serial8250_unregister_port(data->line);
> -	clk_disable_unprepare(data->clk_module);
> -	clk_disable_unprepare(data->clk_baud);
>  }
>  
>  static const struct ingenic_uart_config jz4740_uart_config = {






[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux