Comments attached to bits 0 and 1 incorrectly referenced bits 2 and 3, which don't match the datasheet - fix them. At the same time remove comments for individual macros, as they add nothing to the definitions themselves. Signed-off-by: Lech Perczak <lech.perczak@xxxxxxxxxxxxxxx> --- Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Cc: Jiri Slaby <jirislaby@xxxxxxxxxx> Cc: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx> Cc: Andy Shevchenko <andy@xxxxxxxxxx> --- drivers/tty/serial/sc16is7xx.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 8a2020f9930e..36b7c682ae94 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -266,9 +266,9 @@ * and writing to IER[7:4], * FCR[5:4], MCR[7:5] */ -#define SC16IS7XX_EFR_SWFLOW3_BIT (1 << 3) /* SWFLOW bit 3 */ -#define SC16IS7XX_EFR_SWFLOW2_BIT (1 << 2) /* SWFLOW bit 2 - * +#define SC16IS7XX_EFR_SWFLOW3_BIT (1 << 3) +#define SC16IS7XX_EFR_SWFLOW2_BIT (1 << 2) + /* * SWFLOW bits 3 & 2 table: * 00 -> no transmitter flow * control @@ -280,10 +280,10 @@ * XON1, XON2, XOFF1 and * XOFF2 */ -#define SC16IS7XX_EFR_SWFLOW1_BIT (1 << 1) /* SWFLOW bit 2 */ -#define SC16IS7XX_EFR_SWFLOW0_BIT (1 << 0) /* SWFLOW bit 3 - * - * SWFLOW bits 3 & 2 table: +#define SC16IS7XX_EFR_SWFLOW1_BIT (1 << 1) +#define SC16IS7XX_EFR_SWFLOW0_BIT (1 << 0) + /* + * SWFLOW bits 1 & 0 table: * 00 -> no received flow * control * 01 -> receiver compares -- 2.34.1
