> Subject: Re: [PATCH] tty: serial: fsl_lpuart: mark last busy before
> uart_add_one_port
>
> Am Donnerstag, 8. August 2024, 16:03:25 CEST schrieb Peng Fan (OSS):
> > From: Peng Fan <peng.fan@xxxxxxx>
> >
> > With "earlycon initcall_debug=1 loglevel=8" in bootargs, kernel
> > sometimes boot hang. It is because normal console still is not ready,
> > but runtime suspend is called, so early console putchar will hang in
> > waiting TRDE set in UARTSTAT.
> >
> > The lpuart driver has auto suspend delay set to 3000ms, but during
> > uart_add_one_port, a child device serial ctrl will added and probed
> > with its pm runtime enabled(see serial_ctrl.c).
> > The runtime suspend call path is:
> > device_add
> > |-> bus_probe_device
> > |->device_initial_probe
> > |->__device_attach
> > |-> pm_runtime_get_sync(dev->parent);
> > |-> pm_request_idle(dev);
> > |-> pm_runtime_put(dev->parent);
> >
> > So in the end, before normal console ready, the lpuart get runtime
> > suspended. And earlycon putchar will hang.
> >
> > To address the issue, mark last busy just after pm_runtime_enable,
> > three seconds is long enough to switch from bootconsole to normal
> > console.
> >
> > Fixes: 43543e6f539b ("tty: serial: fsl_lpuart: Add runtime pm
> > support")
> > Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> > ---
> > drivers/tty/serial/fsl_lpuart.c | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/tty/serial/fsl_lpuart.c
> > b/drivers/tty/serial/fsl_lpuart.c index 615291ea9b5e..77efa7ee6eda
> > 100644
> > --- a/drivers/tty/serial/fsl_lpuart.c
> > +++ b/drivers/tty/serial/fsl_lpuart.c
> > @@ -2923,6 +2923,7 @@ static int lpuart_probe(struct
> platform_device *pdev)
> > pm_runtime_set_autosuspend_delay(&pdev->dev,
> UART_AUTOSUSPEND_TIMEOUT);
> > pm_runtime_set_active(&pdev->dev);
> > pm_runtime_enable(&pdev->dev);
> > + pm_runtime_mark_last_busy(&pdev->dev);
>
> This change looks sensible to me. Is maybe [1] addressing the same
> issue at a different level?
If the lpuart driver is built as module, [1] could not resolve the issue.
And if lpuart driver is built as module, [1] might break earlycon.
of_clk_drop_stdout_clocks disables clocks, but lpuart driver not
insmod at that time.
The current patch is simple and easy for backporting to stable
tree. [1] is not suitable for backporting to stable tree.
Regards,
Peng.
>
> Best regards,
> Alexander
>
> [1] https://lore.kernel.org/all/20240808-gs101-non-essential-clocks-2-v6-0-e91c537acedc@xxxxxxxxxx/
>
> >
> > ret = lpuart_global_reset(sport);
> > if (ret)
> >
>
>
> --
> TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld,
> Germany Amtsgericht München, HRB 105018
> Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2F
> www.tq-
> group.com%2F&data=05%7C02%7Cpeng.fan%40nxp.com%7C40e104d
> ceb2146494b3608dcb7bea82c%7C686ea1d3bc2b4c6fa92cd99c5c301
> 635%7C0%7C0%7C638587276699315042%7CUnknown%7CTWFpbGZ
> sb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJX
> VCI6Mn0%3D%7C0%7C%7C%7C&sdata=F%2FHNvj%2Bh5VdTVfRaYkXF
> VwYfm7NTUcy2o4UaewMHvT4%3D&reserved=0
>
