Re: [PATCH v2 1/3] dt-bindings: serial: Add Loongson UART controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




在 2024/8/4 16:43, Krzysztof Kozlowski 写道:
On 04/08/2024 08:38,zhenghaowei@xxxxxxxxxxx wrote:

Due to lack of changelog, I assume you send the same patch, so:

<form letter>
This is a friendly reminder during the review process.

It seems my or other reviewer's previous comments were not fully
addressed. Maybe the feedback got lost between the quotes, maybe you
just forgot to apply it. Please go back to the previous discussion and
either implement all requested changes or keep discussing them.

Thank you.
</form letter>

Also:

+
+  clocks:
+    maxItems: 1
+
+  fractional-division:
Where are this and following defined? In which schema?

These and the ones below are new definitions, can I use them like this?

+  fractional-division:
+    description: Enables fractional-N division. Currently,
+      only LS2K1500 and LS2K2000 support this feature.
+    type: boolean

+    description: Enables fractional-N division. Currently,
+      only LS2K1500 and LS2K2000 support this feature.
+
+  rts-invert:
+    description: Inverts the RTS value in the MCR register.
+      This should be used on Loongson-3 series CPUs, Loongson-2K
+      series CPUs, and Loongson LS7A bridge chips.
+
+  dtr-invert:
+    description: Inverts the DTR value in the MCR register.
+      This should be used on Loongson-3 series CPUs, Loongson-2K
+      series CPUs, and Loongson LS7A bridge chips.
+
+  cts-invert:
+    description: Inverts the CTS value in the MSR register.
+      This should be used on Loongson-2K0500, Loongson-2K1000,
+      and Loongson LS7A bridge chips.
+
+  dsr-invert:
+    description: Inverts the DSR value in the MSR register.
+      This should be used on Loongson-2K0500, Loongson-2K1000,
+      and Loongson LS7A bridge chips.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - $ref: serial.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/loongson,ls2k-clk.h>
+
+    serial@1fe001e0 {
+        compatible = "loongson,ls7a-uart";
+        reg = <0x0 0x1fe001e0 0x0 0x10>;
+        clock-frequency = <100000000>;
+        interrupt-parent = <&liointc>;
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+        fractional-division;
+        rts-invert;
+        dtr-invert;
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 8766f3e5e87e..a6306327dba5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13189,6 +13189,13 @@ S:	Maintained
  F:	Documentation/devicetree/bindings/i2c/loongson,ls2x-i2c.yaml
  F:	drivers/i2c/busses/i2c-ls2x.c
+LOONGSON UART DRIVER
+M:	Haowei Zheng<zhenghaowei@xxxxxxxxxxx>
+L:	linux-serial@xxxxxxxxxxxxxxx
+S:	Maintained
+F:	Documentation/devicetree/bindings/serial/loongson,ls7a-uart.yaml
+F:	drivers/tty/serial/8250/8250_loongson.c
There is no such file.

Best regards,
Krzysztof

The file "drivers/tty/serial/8250/8250_loongson.c" will be created in the patch

"tty: serial: 8250: Add loongson uart driver support". Is it inappropriate to reference it here?


Best regards,

Haowei Zheng





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux