From: Haowei Zheng <zhenghaowei@xxxxxxxxxxx> Change to use the Loongson UART driver by default. Signed-off-by: Haowei Zheng <zhenghaowei@xxxxxxxxxxx> --- arch/loongarch/boot/dts/loongson-2k0500.dtsi | 6 +++++- arch/loongarch/boot/dts/loongson-2k1000.dtsi | 6 +++++- arch/loongarch/boot/dts/loongson-2k2000.dtsi | 5 ++++- 3 files changed, 14 insertions(+), 3 deletions(-) diff --git a/arch/loongarch/boot/dts/loongson-2k0500.dtsi b/arch/loongarch/boot/dts/loongson-2k0500.dtsi index 3b38ff8853a7..aba6c0991b36 100644 --- a/arch/loongarch/boot/dts/loongson-2k0500.dtsi +++ b/arch/loongarch/boot/dts/loongson-2k0500.dtsi @@ -220,12 +220,16 @@ tsensor: thermal-sensor@1fe11500 { }; uart0: serial@1ff40800 { - compatible = "ns16550a"; + compatible = "loongson,ls7a-uart"; reg = <0x0 0x1ff40800 0x0 0x10>; clock-frequency = <100000000>; interrupt-parent = <&eiointc>; interrupts = <2>; no-loopback-test; + rts-invert; + dtr-invert; + cts-invert; + dsr-invert; status = "disabled"; }; diff --git a/arch/loongarch/boot/dts/loongson-2k1000.dtsi b/arch/loongarch/boot/dts/loongson-2k1000.dtsi index 92180140eb56..44c57d2e5dc2 100644 --- a/arch/loongarch/boot/dts/loongson-2k1000.dtsi +++ b/arch/loongarch/boot/dts/loongson-2k1000.dtsi @@ -297,12 +297,16 @@ dma-controller@1fe00c40 { }; uart0: serial@1fe20000 { - compatible = "ns16550a"; + compatible = "loongson,ls7a-uart"; reg = <0x0 0x1fe20000 0x0 0x10>; clock-frequency = <125000000>; interrupt-parent = <&liointc0>; interrupts = <0x0 IRQ_TYPE_LEVEL_HIGH>; no-loopback-test; + rts-invert; + dtr-invert; + cts-invert; + dsr-invert; status = "disabled"; }; diff --git a/arch/loongarch/boot/dts/loongson-2k2000.dtsi b/arch/loongarch/boot/dts/loongson-2k2000.dtsi index 0953c5707825..394494aaa242 100644 --- a/arch/loongarch/boot/dts/loongson-2k2000.dtsi +++ b/arch/loongarch/boot/dts/loongson-2k2000.dtsi @@ -174,12 +174,15 @@ rtc0: rtc@100d0100 { }; uart0: serial@1fe001e0 { - compatible = "ns16550a"; + compatible = "loongson,ls7a-uart"; reg = <0x0 0x1fe001e0 0x0 0x10>; clock-frequency = <100000000>; interrupt-parent = <&liointc>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; no-loopback-test; + fractional-division; + rts-invert; + dtr-invert; status = "disabled"; }; -- 2.43.0