Re: [PATCH 2/3] serial: qcom-geni: fix soft lockup on sw flow control and suspend

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 26, 2024 at 09:54:40AM +0200, Johan Hovold wrote:
> On Mon, Jun 24, 2024 at 02:58:39PM -0700, Doug Anderson wrote:

> > 1. The function is named qcom_geni_serial_clear_tx_fifo() which
> > implies that when it finishes that the hardware FIFO will have nothing
> > in it. ...but how does your code ensure this?
> 
> Yeah, I realised after I sent out the series that this may not be the
> case. I was under the impression that cancelling a command would discard
> the data in the FIFO (e.g. when starting the next command) but that was
> probably an error in my mental model.

I went back and did some more reverse engineering and have now confirmed
that the hardware works as I assumed for v1, that is, that cancelling a
command leaves data in the fifo, which is later discarded when a new
command is issued.

> > 3. On my hardware you're setting the FIFO level to 16 here. The docs I
> > have say that if the FIFO level is "less than" the value you set here
> > then the interrupt will go off and further clarifies that if you set
> > the register to 1 here then you'll get interrupted when the FIFO is
> > empty. So what happens with your solution if the FIFO is completely
> > full? In that case you'd have to set this to 17, right? ...but then I
> > could believe that might confuse the interrupt handler which would get
> > told to start transmitting when there is no room for anything.
> 
> Indeed. I may implicitly be relying on the absence of hardware flow
> control as well so that waiting for one character to be sent is what
> makes this work.

I'm keeping the watermark level unchanged in v2 and instead restart tx
by issuing a short transfer command to clear any stale data from the
fifo which could prevent the watermark interrupt from firing.

Johan




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux