The main goal of this series is to fix the data disappearance in case of the DW UART handled by the DW AHB DMA engine. The problem happens on a portion of the data received when the pre-initialized DEV_TO_MEM DMA-transfer is paused and then disabled. The data just hangs up in the DMA-engine FIFO and isn't flushed out to the memory on the DMA-channel suspension (see the second commit log for details). On a way to find the denoted problem fix it was discovered that the driver doesn't verify the peripheral device address width specified by a client driver, which in its turn if unsupported or undefined value passed may cause DMA-transfer being misconfigured. It's fixed in the first patch of the series. In addition to that three cleanup patches follow the fixes described above in order to make the DWC-engine configuration procedure more coherent. First one simplifies the CTL_LO register setup methods. Second and third patches simplify the max-burst calculation procedure and unify it with the rest of the verification methods. Please see the patches log for more details. Final patch is another cleanup which unifies the status variables naming in the driver. Link: https://lore.kernel.org/dmaengine/20240416162908.24180-1-fancer.lancer@xxxxxxxxx/ Changelog v2: - Add a note to the Patch #1 commit message about having the verification method called in the dwc_config() function. (Andy) - Add hyphen to "1byte" in the in-situ comment. (Andy) - Convert "err" to "ret" variables and add a new patch which unifies the status variables naming. (Andy) - Add a in-situ comment regarding why the memory-side bus width verification was required. (Andy) - Group sms+dms and smsize+dmsize local variables initializations up. (Andy) - Move the zero initializations out to the variables init block in the prepare_ctllo() callbacks. (Andy) - Directly refer to dwc_config() in the commit messages. (Andy) - Convert dwc_verify_maxburst() to returning zero. (Andy) - Add a comment regarding the values utilized in dwc_verify_p_buswidth() being pre-verified before the method is called. (Andy) - Add new patches: [PATCH v2 4/6] dmaengine: dw: Define encode_maxburst() above prepare_ctllo() callbacks [PATCH v2 6/6] dmaengine: dw: Unify ret-val local variable naming (Andy) Link: https://lore.kernel.org/dmaengine/20240419175655.25547-1-fancer.lancer@xxxxxxxxx/ Changelog v3: - Rebase onto the kernel 6.10-rc4. - Just resend. base-commit: 6ba59ff4227927d3a8530fc2973b80e94b54d58f Signed-off-by: Serge Semin <fancer.lancer@xxxxxxxxx> Cc: "Ilpo Järvinen" <ilpo.jarvinen@xxxxxxxxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Cc: Jiri Slaby <jirislaby@xxxxxxxxxx> Cc: dmaengine@xxxxxxxxxxxxxxx Cc: linux-serial@xxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx Serge Semin (6): dmaengine: dw: Add peripheral bus width verification dmaengine: dw: Add memory bus width verification dmaengine: dw: Simplify prepare CTL_LO methods dmaengine: dw: Define encode_maxburst() above prepare_ctllo() callbacks dmaengine: dw: Simplify max-burst calculation procedure dmaengine: dw: Unify ret-val local variables naming drivers/dma/dw/core.c | 131 +++++++++++++++++++++++++++++++------- drivers/dma/dw/dw.c | 40 +++++++----- drivers/dma/dw/idma32.c | 19 +++--- drivers/dma/dw/platform.c | 20 +++--- drivers/dma/dw/regs.h | 1 - 5 files changed, 154 insertions(+), 57 deletions(-) -- 2.43.0
