With a small modification the qcom_geni_serial_poll_bit() function
could be used to poll more than just a single bit. Let's generalize
it. We'll make the qcom_geni_serial_poll_bit() into just a wrapper of
the general function.
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
The new function isn't used yet (except by the wrapper) but will be
used in a future change.
Changes in v2:
- New
drivers/tty/serial/qcom_geni_serial.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 71258eefa654..539a6ac85511 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -265,8 +265,8 @@ static bool qcom_geni_serial_secondary_active(struct uart_port *uport)
return readl(uport->membase + SE_GENI_STATUS) & S_GENI_CMD_ACTIVE;
}
-static bool qcom_geni_serial_poll_bit(struct uart_port *uport,
- unsigned int offset, u32 field, bool set)
+static bool qcom_geni_serial_poll_bitfield(struct uart_port *uport,
+ unsigned int offset, u32 field, u32 val)
{
u32 reg;
struct qcom_geni_serial_port *port;
@@ -321,7 +321,7 @@ static bool qcom_geni_serial_poll_bit(struct uart_port *uport,
timeout_us = DIV_ROUND_UP(timeout_us, 10) * 10;
while (timeout_us) {
reg = readl(uport->membase + offset);
- if ((bool)(reg & field) == set)
+ if ((reg & field) == val)
return true;
udelay(10);
timeout_us -= 10;
@@ -329,6 +329,12 @@ static bool qcom_geni_serial_poll_bit(struct uart_port *uport,
return false;
}
+static bool qcom_geni_serial_poll_bit(struct uart_port *uport,
+ unsigned int offset, u32 field, bool set)
+{
+ return qcom_geni_serial_poll_bitfield(uport, offset, field, set ? field : 0);
+}
+
static void qcom_geni_serial_setup_tx(struct uart_port *uport, u32 xmit_size)
{
u32 m_cmd;
--
2.45.1.288.g0e0cd299f1-goog
