The Marvell PXA SSP block is the same or similiar to the MMP2 variant.
The only difference in the binding is the PXA version supports DMA (and
that's probably a binding difference rather than an actual h/w
difference).
The old binding didn't belong under 'serial' as it is not a UART. The
SSP block also supports audio devices, so 'spi' is not a perfect fit
either. As the existing schema for MMP2 is there, just leave things
as-is.
The examples in the old text binding were pretty out of sync with
reality. 'clock-names' and 'ssp-id' aren't documented nor used.
Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Signed-off-by: Rob Herring (Arm) <robh@xxxxxxxxxx>
---
.../bindings/serial/mrvl,pxa-ssp.txt | 64 -------------------
.../bindings/spi/marvell,mmp2-ssp.yaml | 35 ++++++++--
2 files changed, 31 insertions(+), 68 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt
diff --git a/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt b/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt
deleted file mode 100644
index d10cc06c0c37..000000000000
--- a/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-Device tree bindings for Marvell PXA SSP ports
-
-Required properties:
-
- - compatible: Must be one of
- mrvl,pxa25x-ssp
- mvrl,pxa25x-nssp
- mrvl,pxa27x-ssp
- mrvl,pxa3xx-ssp
- mvrl,pxa168-ssp
- mrvl,pxa910-ssp
- mrvl,ce4100-ssp
-
- - reg: The memory base
- - dmas: Two dma phandles, one for rx, one for tx
- - dma-names: Must be "rx", "tx"
-
-
-Example for PXA3xx:
-
- ssp0: ssp@41000000 {
- compatible = "mrvl,pxa3xx-ssp";
- reg = <0x41000000 0x40>;
- ssp-id = <1>;
- interrupts = <24>;
- clock-names = "pxa27x-ssp.0";
- dmas = <&dma 13
- &dma 14>;
- dma-names = "rx", "tx";
- };
-
- ssp1: ssp@41700000 {
- compatible = "mrvl,pxa3xx-ssp";
- reg = <0x41700000 0x40>;
- ssp-id = <2>;
- interrupts = <16>;
- clock-names = "pxa27x-ssp.1";
- dmas = <&dma 15
- &dma 16>;
- dma-names = "rx", "tx";
- };
-
- ssp2: ssp@41900000 {
- compatibl3 = "mrvl,pxa3xx-ssp";
- reg = <0x41900000 0x40>;
- ssp-id = <3>;
- interrupts = <0>;
- clock-names = "pxa27x-ssp.2";
- dmas = <&dma 66
- &dma 67>;
- dma-names = "rx", "tx";
- };
-
- ssp3: ssp@41a00000 {
- compatible = "mrvl,pxa3xx-ssp";
- reg = <0x41a00000 0x40>;
- ssp-id = <4>;
- interrupts = <13>;
- clock-names = "pxa27x-ssp.3";
- dmas = <&dma 2
- &dma 3>;
- dma-names = "rx", "tx";
- };
-
diff --git a/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml b/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
index 5f4f6b5615d0..0a1bada8f800 100644
--- a/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
+++ b/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
@@ -10,12 +10,17 @@ title: PXA2xx SSP SPI Controller
maintainers:
- Lubomir Rintel <lkundrak@xxxxx>
-allOf:
- - $ref: spi-controller.yaml#
-
properties:
compatible:
- const: marvell,mmp2-ssp
+ enum:
+ - marvell,mmp2-ssp
+ - mrvl,ce4100-ssp
+ - mvrl,pxa168-ssp
+ - mrvl,pxa25x-ssp
+ - mvrl,pxa25x-nssp
+ - mrvl,pxa27x-ssp
+ - mrvl,pxa3xx-ssp
+ - mrvl,pxa910-ssp
interrupts:
maxItems: 1
@@ -26,6 +31,16 @@ properties:
clocks:
maxItems: 1
+ dmas:
+ items:
+ - description: Receive DMA
+ - description: Transmit DMA
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
ready-gpios:
description: |
GPIO used to signal a SPI master that the FIFO is filled and we're
@@ -41,6 +56,18 @@ required:
dependencies:
ready-gpios: [ spi-slave ]
+allOf:
+ - $ref: spi-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: marvell,mmp2-ssp
+ then:
+ properties:
+ dmas: false
+ dma-names: false
+
unevaluatedProperties: false
examples:
--
2.43.0
