[PATCH] serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If a serdev_device_driver is already loaded for a serdev_tty_port when it
gets registered by tty_port_register_device_attr_serdev() then that
driver's probe() method will be called immediately.

The serdev_device_driver's probe() method should then be able to call
serdev_device_open() successfully, but because UPF_DEAD is still dead
serdev_device_open() will fail with -ENXIO in this scenario:

  serdev_device_open()
  ctrl->ops->open()	/* this callback being ttyport_open() */
  tty->ops->open()	/* this callback being uart_open() */
  tty_port_open()
  port->ops->activate()	/* this callback being uart_port_activate() */
  Find bit UPF_DEAD is set in uport->flags and fail with errno -ENXIO.

Fix this be clearing UPF_DEAD before tty_port_register_device_attr_serdev()
note this only moves up the UPD_DEAD clearing a small bit, before:

  tty_port_register_device_attr_serdev();
  mutex_unlock(&tty_port.mutex);
  uart_port.flags &= ~UPF_DEAD;
  mutex_unlock(&port_mutex);

after:

  uart_port.flags &= ~UPF_DEAD;
  tty_port_register_device_attr_serdev();
  mutex_unlock(&tty_port.mutex);
  mutex_unlock(&port_mutex);

Reported-by: Weifeng Liu <weifeng.liu.z@xxxxxxxxx>
Closes: https://lore.kernel.org/platform-driver-x86/20240505130800.2546640-1-weifeng.liu.z@xxxxxxxxx/
Tested-by: Weifeng Liu <weifeng.liu.z@xxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Cc: Tony Lindgren <tony.lindgren@xxxxxxxxxxxxxxx>
Cc: Maximilian Luz <luzmaximilian@xxxxxxxxx>
Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/tty/serial/serial_core.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index c476d884356d..b47a277978a0 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -3211,6 +3211,9 @@ static int serial_core_add_one_port(struct uart_driver *drv, struct uart_port *u
 	if (uport->attr_group)
 		uport->tty_groups[1] = uport->attr_group;
 
+	/* Ensure serdev drivers can call serdev_device_open() right away */
+	uport->flags &= ~UPF_DEAD;
+
 	/*
 	 * Register the port whether it's detected or not.  This allows
 	 * setserial to be used to alter this port's parameters.
@@ -3221,6 +3224,7 @@ static int serial_core_add_one_port(struct uart_driver *drv, struct uart_port *u
 	if (!IS_ERR(tty_dev)) {
 		device_set_wakeup_capable(tty_dev, 1);
 	} else {
+		uport->flags |= UPF_DEAD;
 		dev_err(uport->dev, "Cannot register tty device on line %d\n",
 		       uport->line);
 	}
@@ -3426,8 +3430,6 @@ int serial_core_register_port(struct uart_driver *drv, struct uart_port *port)
 	if (ret)
 		goto err_unregister_port_dev;
 
-	port->flags &= ~UPF_DEAD;
-
 	mutex_unlock(&port_mutex);
 
 	return 0;
-- 
2.44.0





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux