There are two similar switch-cases which use different style.
Unify them and one more to return from the cases directly.
While at it, add missing default in another switch-case.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_exar.c | 80 +++++++++++------------------
1 file changed, 29 insertions(+), 51 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 1f04d4562878..51f6af16c557 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -627,6 +627,8 @@ pci_fastcom335_setup(struct exar8250 *priv, struct pci_dev *pcidev,
writeb(0xc0, p + UART_EXAR_MPIOINV_7_0);
writeb(0xc0, p + UART_EXAR_MPIOSEL_7_0);
break;
+ default:
+ break;
}
writeb(0x00, p + UART_EXAR_MPIOINT_7_0);
writeb(0x00, p + UART_EXAR_MPIO3T_7_0);
@@ -723,8 +725,6 @@ static enum cti_port_type cti_get_port_type_xr17c15x_xr17v25x(struct exar8250 *p
struct pci_dev *pcidev,
unsigned int port_num)
{
- enum cti_port_type port_type;
-
switch (pcidev->subsystem_device) {
// RS232 only cards
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232:
@@ -734,24 +734,17 @@ static enum cti_port_type cti_get_port_type_xr17c15x_xr17v25x(struct exar8250 *p
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_SP_232_NS:
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_XPRS_LP_232:
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_XPRS_LP_232_NS:
- port_type = CTI_PORT_TYPE_RS232;
- break;
+ return CTI_PORT_TYPE_RS232;
// 1x RS232, 1x RS422/RS485
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1:
- port_type = (port_num == 0) ?
- CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
- break;
+ return (port_num == 0) ? CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
// 2x RS232, 2x RS422/RS485
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2:
- port_type = (port_num < 2) ?
- CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
- break;
+ return (port_num < 2) ? CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
// 4x RS232, 4x RS422/RS485
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4:
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4_SP:
- port_type = (port_num < 4) ?
- CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
- break;
+ return (port_num < 4) ? CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
// RS232/RS422/RS485 HW (jumper) selectable
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2:
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4:
@@ -774,32 +767,24 @@ static enum cti_port_type cti_get_port_type_xr17c15x_xr17v25x(struct exar8250 *p
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_XP_OPTO:
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4_XPRS_OPTO:
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_XPRS_LP:
- port_type = CTI_PORT_TYPE_RS232_422_485_HW;
- break;
+ return CTI_PORT_TYPE_RS232_422_485_HW;
// RS422/RS485 HW (jumper) selectable
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485:
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485:
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485:
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_SP_485:
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_XPRS_LP_485:
- port_type = CTI_PORT_TYPE_RS422_485;
- break;
+ return CTI_PORT_TYPE_RS422_485;
// 6x RS232, 2x RS422/RS485
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_6_2_SP:
- port_type = (port_num < 6) ?
- CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
- break;
+ return (port_num < 6) ? CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
// 2x RS232, 6x RS422/RS485
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_6_SP:
- port_type = (port_num < 2) ?
- CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
- break;
+ return (port_num < 2) ? CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
default:
dev_err(&pcidev->dev, "unknown/unsupported device\n");
- port_type = CTI_PORT_TYPE_NONE;
+ return CTI_PORT_TYPE_NONE;
}
-
- return port_type;
}
/**
@@ -816,20 +801,15 @@ static enum cti_port_type cti_get_port_type_fpga(struct exar8250 *priv,
struct pci_dev *pcidev,
unsigned int port_num)
{
- enum cti_port_type port_type;
-
switch (pcidev->device) {
case PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_12_XIG00X:
case PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_12_XIG01X:
case PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_16:
- port_type = CTI_PORT_TYPE_RS232_422_485_HW;
- break;
+ return CTI_PORT_TYPE_RS232_422_485_HW;
default:
dev_err(&pcidev->dev, "unknown/unsupported device\n");
return CTI_PORT_TYPE_NONE;
}
-
- return port_type;
}
/**
@@ -1493,35 +1473,33 @@ static irqreturn_t exar_misc_handler(int irq, void *data)
return IRQ_HANDLED;
}
-static unsigned int exar_get_nr_ports(struct exar8250_board *board,
- struct pci_dev *pcidev)
+static unsigned int exar_get_nr_ports(struct exar8250_board *board, struct pci_dev *pcidev)
{
- unsigned int nr_ports = 0;
+ if (pcidev->vendor == PCI_VENDOR_ID_ACCESSIO)
+ return BIT(((pcidev->device & 0x38) >> 3) - 1);
- if (pcidev->vendor == PCI_VENDOR_ID_ACCESSIO) {
- nr_ports = BIT(((pcidev->device & 0x38) >> 3) - 1);
- } else if (board->num_ports > 0) {
- // Check if board struct overrides number of ports
- nr_ports = board->num_ports;
- } else if (pcidev->vendor == PCI_VENDOR_ID_EXAR) {
- // Exar encodes # ports in last nibble of PCI Device ID ex. 0358
- nr_ports = pcidev->device & 0x0f;
- } else if (pcidev->vendor == PCI_VENDOR_ID_CONNECT_TECH) {
- // Handle CTI FPGA cards
+ // Check if board struct overrides number of ports
+ if (board->num_ports > 0)
+ return board->num_ports;
+
+ // Exar encodes # ports in last nibble of PCI Device ID ex. 0358
+ if (pcidev->vendor == PCI_VENDOR_ID_EXAR)
+ return pcidev->device & 0x0f;
+
+ // Handle CTI FPGA cards
+ if (pcidev->vendor == PCI_VENDOR_ID_CONNECT_TECH) {
switch (pcidev->device) {
case PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_12_XIG00X:
case PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_12_XIG01X:
- nr_ports = 12;
- break;
+ return 12;
case PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_16:
- nr_ports = 16;
- break;
+ return 16;
default:
- break;
+ return 0;
}
}
- return nr_ports;
+ return 0;
}
static int
--
2.43.0.rc1.1336.g36b5255a03ac
