From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
Before, sc16is7xx_lines was checked for a free (zero) bit first, and then
later it was set only if UART port registration succeeded.
Now that sc16is7xx_lines is shared for the I2C and SPI drivers, make sure
it is reserved and modified atomically, and use a new variable to hold the
status of UART port regisration.
Remove need to check for previous port registration in sc16is7xx_remove(),
because if sc16is7xx_probe() succeeded, we are guaranteed to have
successfully registered both ports.
Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
---
drivers/tty/serial/sc16is7xx.c | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 5b53c88b7133..d81aad1b201d 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -343,6 +343,8 @@ struct sc16is7xx_port {
static DECLARE_BITMAP(sc16is7xx_lines, SC16IS7XX_MAX_DEVS);
+static DEFINE_MUTEX(sc16is7xx_lines_lock); /* For probe atomic line reservation. */
+
static struct uart_driver sc16is7xx_uart = {
.owner = THIS_MODULE,
.driver_name = SC16IS7XX_NAME,
@@ -1468,6 +1470,7 @@ int sc16is7xx_probe(struct device *dev, const struct sc16is7xx_devtype *devtype,
u32 uartclk = 0;
int i, ret;
struct sc16is7xx_port *s;
+ bool port_registered[SC16IS7XX_MAX_PORTS];
for (i = 0; i < devtype->nr_uart; i++)
if (IS_ERR(regmaps[i]))
@@ -1532,14 +1535,21 @@ int sc16is7xx_probe(struct device *dev, const struct sc16is7xx_devtype *devtype,
regmap_write(regmaps[0], SC16IS7XX_IOCONTROL_REG,
SC16IS7XX_IOCONTROL_SRESET_BIT);
+ memset(port_registered, 0, sizeof(port_registered));
+
for (i = 0; i < devtype->nr_uart; ++i) {
+ mutex_lock(&sc16is7xx_lines_lock);
s->p[i].port.line = find_first_zero_bit(sc16is7xx_lines,
SC16IS7XX_MAX_DEVS);
if (s->p[i].port.line >= SC16IS7XX_MAX_DEVS) {
ret = -ERANGE;
+ mutex_unlock(&sc16is7xx_lines_lock);
goto out_ports;
}
+ set_bit(s->p[i].port.line, sc16is7xx_lines);
+ mutex_unlock(&sc16is7xx_lines_lock);
+
/* Initialize port data */
s->p[i].port.dev = dev;
s->p[i].port.irq = irq;
@@ -1584,7 +1594,7 @@ int sc16is7xx_probe(struct device *dev, const struct sc16is7xx_devtype *devtype,
if (ret)
goto out_ports;
- set_bit(s->p[i].port.line, sc16is7xx_lines);
+ port_registered[i] = true;
/* Enable EFR */
sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_LCR_REG,
@@ -1642,9 +1652,11 @@ int sc16is7xx_probe(struct device *dev, const struct sc16is7xx_devtype *devtype,
#endif
out_ports:
- for (i = 0; i < devtype->nr_uart; i++)
- if (test_and_clear_bit(s->p[i].port.line, sc16is7xx_lines))
+ for (i = 0; i < devtype->nr_uart; i++) {
+ clear_bit(s->p[i].port.line, sc16is7xx_lines);
+ if (port_registered[i])
uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port);
+ }
kthread_stop(s->kworker_task);
@@ -1667,8 +1679,8 @@ void sc16is7xx_remove(struct device *dev)
for (i = 0; i < s->devtype->nr_uart; i++) {
kthread_cancel_delayed_work_sync(&s->p[i].ms_work);
- if (test_and_clear_bit(s->p[i].port.line, sc16is7xx_lines))
- uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port);
+ clear_bit(s->p[i].port.line, sc16is7xx_lines);
+ uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port);
sc16is7xx_power(&s->p[i].port, 0);
}
--
2.39.2
