On Wed, Mar 06, 2024 at 06:10:30PM +0000, Joshua Yeong wrote: > > > -----Original Message----- > > From: Frank Li <Frank.li@xxxxxxx> > > Sent: Thursday, March 7, 2024 1:45 AM > > To: Joshua Yeong <joshua.yeong@xxxxxxxxxxxxxxxx> > > Cc: alexandre.belloni@xxxxxxxxxxx; conor.culhane@xxxxxxxxxxx; > > devicetree@xxxxxxxxxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx; > > ilpo.jarvinen@xxxxxxxxxxxxxxx; imx@xxxxxxxxxxxxxxx; jirislaby@xxxxxxxxxx; > > joe@xxxxxxxxxxx; krzysztof.kozlowski+dt@xxxxxxxxxx; > > krzysztof.kozlowski@xxxxxxxxxx; linux-i3c@xxxxxxxxxxxxxxxxxxx; linux- > > kernel@xxxxxxxxxxxxxxx; linux-serial@xxxxxxxxxxxxxxx; > > miquel.raynal@xxxxxxxxxxx; robh@xxxxxxxxxx; > > zbigniew.lukwinski@xxxxxxxxxxxxxxx > > Subject: Re: [PATCH v7 5/8] i3c: target: add svc target controller support > > > > On Wed, Mar 06, 2024 at 04:01:17PM +0000, Joshua Yeong wrote: > > > Hi Frank, > > > > > > > -----Original Message----- > > > > From: linux-i3c <linux-i3c-bounces@xxxxxxxxxxxxxxxxxxx> On Behalf Of > > > > Frank Li > > > > Sent: Tuesday, February 6, 2024 7:33 AM > > > > To: frank.li@xxxxxxx > > > > Cc: alexandre.belloni@xxxxxxxxxxx; conor.culhane@xxxxxxxxxxx; > > > > devicetree@xxxxxxxxxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx; > > > > ilpo.jarvinen@xxxxxxxxxxxxxxx; imx@xxxxxxxxxxxxxxx; > > > > jirislaby@xxxxxxxxxx; joe@xxxxxxxxxxx; > > > > krzysztof.kozlowski+dt@xxxxxxxxxx; > > > > krzysztof.kozlowski@xxxxxxxxxx; linux-i3c@xxxxxxxxxxxxxxxxxxx; > > > > linux- kernel@xxxxxxxxxxxxxxx; linux-serial@xxxxxxxxxxxxxxx; > > > > miquel.raynal@xxxxxxxxxxx; robh@xxxxxxxxxx; > > > > zbigniew.lukwinski@xxxxxxxxxxxxxxx > > > > Subject: [PATCH v7 5/8] i3c: target: add svc target controller > > > > support > > > > > > > > Add Silvaco I3C target controller support > > > > > > > > Signed-off-by: Frank Li <Frank.Li@xxxxxxx> > > > > --- > > > > > > > > Notes: > > > > Change from v2 to v3 > > > > - fix build warning > > > > > > > > drivers/i3c/master/Makefile | 2 +- > > > > drivers/i3c/master/svc-i3c-main.c | 35 +- > > > > drivers/i3c/master/svc-i3c-target.c | 776 > > > > > > I think putting target mode files under "master" might not make sense. > > > We might have to consider that we may have a "secondary master" mode. > > > Some other ways of splitting or handling of target mode is needed here. > > > > I think name 'master' is not good here. Previously only support 'master' > > mode, it should be fine. Now many controller are dual mode. > > > > And I3C spec use 'controller/target' instead of 'master/slave'. I think > > 'controller' as master are quite confused. It can be master controller and slave > > controller. > > > > Anyway, slave/master may share some code and resource, even only one file. > > > > So far, I think it is fine put under master now. we can rename 'master' > > later when more dual mode controller added. > > > > Frank > > I am currently working on secondary-controller mode. I would like to explore if > we can have a different way to implement various modes. Second controller should be more similar than master mode. > > I am guessing that the current inspiration is coming from the existing i2c > framework. i2c slave mode is quite simple. The major problem is that the latency to fill FIFO. Modem async transfer queue should be better handle it. When host START transfer, fetch one transfer from queue. There are only a simple I2c slave test driver in kernel. I think not much people use it. > > However, I am thinking of having a more generic function to replace the way how > we register the i3c driver. (existing 'i3c_master_register' or > 'devm_i3c_target_ctrl_create' from yours) Maybe along the line where we can have > all the modes set in a struct and return to the i3c framework. So we only need 1 > API to register all the different modes instead of having one each. You can try, but it is not easy. Like USB, PCIE-Endpoint, all was use different register for difference mode. By the way, rename 'master' as 'controller' should be good idea. A I3C IP can support (master, slave and second) controller. I think the folder name should not block issue for this patch series. Frank > > > > > > > > > ... > > > > > > > + > > > > +#define I3C_SCONFIG 0x4 > > > > +#define I3C_SCONFIG_SLVENA_MASK BIT(0) > > > > +#define I3C_SCONFIG_OFFLINE_MASK BIT(9) > > > > +#define I3C_SCONFIG_SADDR_MASK GENMASK(31, 25) > > > > + > > > > +#define I3C_SSTATUS 0x8 > > > > +#define I3C_SSTATUS_STNOTSTOP_MASK BIT(0) > > > > +#define I3C_SSTATUS_STOP_MASK BIT(10) > > > > +#define I3C_SSTATUS_RX_PEND_MASK BIT(11) > > > > +#define I3C_SSTATUS_TXNOTFULL_MASK BIT(12) > > > > +#define I3C_SSTATUS_DACHG_MASK BIT(13) > > > > +#define I3C_SSTATUS_EVDET_MASK GENMASK(21, 20) > > > > +#define I3C_SSTATUS_EVDET_ACKED 0x3 > > > > +#define I3C_SSTATUS_IBIDIS_MASK BIT(24) > > > > +#define I3C_SSTATUS_HJDIS_MASK BIT(27) > > > > + > > > > > > There is couple of space formatting here that requires to be fixed. > > > > > > Cheers, > > > Joshua
