On 25/02/2024 11:03, Raphael Gallais-Pou wrote: > Converts st,asc binding to DT schema format and update example. > > Signed-off-by: Raphael Gallais-Pou <rgallaispou@xxxxxxxxx> > --- > .../devicetree/bindings/serial/st,asc.yaml | 57 +++++++++++++++++++ > .../devicetree/bindings/serial/st-asc.txt | 18 ------ > 2 files changed, 57 insertions(+), 18 deletions(-) > create mode 100644 Documentation/devicetree/bindings/serial/st,asc.yaml > delete mode 100644 Documentation/devicetree/bindings/serial/st-asc.txt > > diff --git a/Documentation/devicetree/bindings/serial/st,asc.yaml b/Documentation/devicetree/bindings/serial/st,asc.yaml > new file mode 100644 > index 000000000000..b26e1d247346 > --- /dev/null > +++ b/Documentation/devicetree/bindings/serial/st,asc.yaml > @@ -0,0 +1,57 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/serial/st,asc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: STMicroelectronics STi SoCs Serial Port > + > +maintainers: > + - Patrice Chotard <patrice.chotard@xxxxxxxxxxx> > + > +allOf: > + - $ref: serial.yaml# > + > +properties: > + compatible: > + const: st,asc > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + clocks: > + maxItems: 1 This wasn't here before and your commit msg does not explain it. > + > + uart-has-rtscts: true Drop, not needed. > + > + st,hw-flow-ctrl: > + description: When set, enable hardware flow control. > + type: boolean > + > + st,force-m1: > + description: When set, force asc to be in Mode-1. This is recommended for > + high bit rates above 19.2K. > + type: boolean > + > +required: > + - compatible > + - reg > + - interrupts > + - clocks Also something new. Best regards, Krzysztof
