Suppress the "unhandled report 0xb1" error since it's related to the UART
DCD/RI function of the multifunctional GPIO pins status, which we do not
use for serial console. The configuration of these pins is a part
of the GPIO patch set.
[ 5453.117113] ft260 0003:0403:6030.0008: unhandled report 0xb1
[ 6641.582307] ft260 0003:0403:6030.0008: unhandled report 0xb1
[13418.439085] ft260 0003:0403:6030.0008: unhandled report 0xb1
[14110.820786] ft260 0003:0403:6030.0008: unhandled report 0xb1
Signed-off-by: Michael Zaidman <michael.zaidman@xxxxxxxxx>
---
drivers/hid/hid-ft260.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/hid/hid-ft260.c b/drivers/hid/hid-ft260.c
index 52ccee83250e..d7eb00aeb669 100644
--- a/drivers/hid/hid-ft260.c
+++ b/drivers/hid/hid-ft260.c
@@ -1768,6 +1768,8 @@ static int ft260_raw_event(struct hid_device *hdev, struct hid_report *report,
} else if (xfer->report >= FT260_UART_REPORT_MIN &&
xfer->report <= FT260_UART_REPORT_MAX) {
return ft260_uart_receive_chars(dev, xfer->data, xfer->length);
+ } else if (xfer->report == FT260_UART_INTERRUPT_STATUS) {
+ return 0;
}
hid_err(hdev, "unhandled report %#02x\n", xfer->report);
--
2.40.1
