[PATCH v1 05/19] hid-ft260: fix unprotected write_buf concurrent access

[Michael Zaidman <michael.zaidman@xxxxxxxxx>]

The UART code uses the write_buf unsafely, compromising the data integrity
of both I2C and UART channels.

The I2C channel uses the write_buf to send the HID reports. It uses mutex
to make it atomically. For UART to use this buffer, it should grab the
same mutex first. But then it will degrade the performance of both
channels. The better approach is to have a separate Tx buffer for UART.

I fixed it and briefly tested the data integrity simultaneously writing
via I2C and UART channels.

Signed-off-by: Michael Zaidman <michael.zaidman@xxxxxxxxx>
---
 drivers/hid/hid-ft260.c | 32 ++++++++++++++++++--------------
 1 file changed, 18 insertions(+), 14 deletions(-)

diff --git a/drivers/hid/hid-ft260.c b/drivers/hid/hid-ft260.c
index 77638cae595e..3d6beac0b8b6 100644
--- a/drivers/hid/hid-ft260.c
+++ b/drivers/hid/hid-ft260.c
@@ -38,9 +38,12 @@ MODULE_PARM_DESC(debug, "Toggle FT260 debugging messages");
 			pr_info("%s: " format, __func__, ##arg);	  \
 	} while (0)
 
-#define FT260_REPORT_MAX_LENGTH (64)
-#define FT260_I2C_DATA_REPORT_ID(len) (FT260_I2C_REPORT_MIN + (len - 1) / 4)
-#define FT260_UART_DATA_REPORT_ID(len) (FT260_UART_REPORT_MIN + (len - 1) / 4)
+#define FT260_REPORT_MAX_LEN (64)
+#define FT260_DATA_REPORT_ID(min, len) (min + (len - 1) / 4)
+#define FT260_I2C_DATA_REPORT_ID(len) \
+		FT260_DATA_REPORT_ID(FT260_I2C_REPORT_MIN, len)
+#define FT260_UART_DATA_REPORT_ID(len) \
+		FT260_DATA_REPORT_ID(FT260_UART_REPORT_MIN, len)
 
 #define FT260_WAKEUP_NEEDED_AFTER_MS (4800) /* 5s minus 200ms margin */
 
@@ -56,7 +59,8 @@ MODULE_PARM_DESC(debug, "Toggle FT260 debugging messages");
  * read payload length to be 180 bytes.
  */
 #define FT260_RD_DATA_MAX (180)
-#define FT260_WR_DATA_MAX (60)
+#define FT260_WR_I2C_DATA_MAX (60)
+#define FT260_WR_UART_DATA_MAX (62)
 
 /*
  * Device interface configuration.
@@ -229,7 +233,7 @@ struct ft260_i2c_write_request_report {
 	u8 address;		/* 7-bit I2C address */
 	u8 flag;		/* I2C transaction condition */
 	u8 length;		/* data payload length */
-	u8 data[FT260_WR_DATA_MAX]; /* data payload */
+	u8 data[FT260_WR_I2C_DATA_MAX]; /* data payload */
 } __packed;
 
 struct ft260_i2c_read_request_report {
@@ -249,7 +253,7 @@ struct ft260_input_report {
 struct ft260_uart_write_request_report {
 	u8 report;		/* FT260_UART_REPORT */
 	u8 length;		/* data payload length */
-	u8 data[] __counted_by(length);	/* variable data payload */
+	u8 data[FT260_WR_UART_DATA_MAX]; /* data payload */
 } __packed;
 
 struct ft260_configure_uart_request {
@@ -318,10 +322,10 @@ struct ft260_device {
 	struct work_struct wakeup_work;
 	bool reschedule_work;
 
-
 	struct completion wait;
 	struct mutex lock;
-	u8 write_buf[FT260_REPORT_MAX_LENGTH];
+	u8 i2c_wr_buf[FT260_REPORT_MAX_LEN];
+	u8 uart_wr_buf[FT260_REPORT_MAX_LEN];
 	unsigned long need_wakeup_at;
 	u8 *read_buf;
 	u16 read_idx;
@@ -503,7 +507,7 @@ static int ft260_i2c_write(struct ft260_device *dev, u8 addr, u8 *data,
 	int ret, wr_len, idx = 0;
 	struct hid_device *hdev = dev->hdev;
 	struct ft260_i2c_write_request_report *rep =
-		(struct ft260_i2c_write_request_report *)dev->write_buf;
+		(struct ft260_i2c_write_request_report *)dev->i2c_wr_buf;
 
 	if (len < 1)
 		return -EINVAL;
@@ -511,12 +515,12 @@ static int ft260_i2c_write(struct ft260_device *dev, u8 addr, u8 *data,
 	rep->flag = FT260_FLAG_START;
 
 	do {
-		if (len <= FT260_WR_DATA_MAX) {
+		if (len <= FT260_WR_I2C_DATA_MAX) {
 			wr_len = len;
 			if (flag == FT260_FLAG_START_STOP)
 				rep->flag |= FT260_FLAG_STOP;
 		} else {
-			wr_len = FT260_WR_DATA_MAX;
+			wr_len = FT260_WR_I2C_DATA_MAX;
 		}
 
 		rep->report = FT260_I2C_DATA_REPORT_ID(wr_len);
@@ -552,7 +556,7 @@ static int ft260_smbus_write(struct ft260_device *dev, u8 addr, u8 cmd,
 	int len = 4;
 
 	struct ft260_i2c_write_request_report *rep =
-		(struct ft260_i2c_write_request_report *)dev->write_buf;
+		(struct ft260_i2c_write_request_report *)dev->i2c_wr_buf;
 
 	if (data_len >= sizeof(rep->data))
 		return -EINVAL;
@@ -1167,10 +1171,10 @@ static int ft260_uart_transmit_chars(struct ft260_device *port)
 		goto tty_out;
 	}
 
-	rep = (struct ft260_uart_write_request_report *)port->write_buf;
+	rep = (struct ft260_uart_write_request_report *)port->uart_wr_buf;
 
 	do {
-		len = min(data_len, FT260_WR_DATA_MAX);
+		len = min(data_len, FT260_WR_UART_DATA_MAX);
 
 		rep->report = FT260_UART_DATA_REPORT_ID(len);
 		rep->length = len;
-- 
2.40.1