On Tue, 23 Jan 2024, Frank Li wrote: > SVC i3c is a dual role controller. Move probe() into svc-i3c-main.c. This > prepares to support target probe depending on dts "mode" settings. > > Signed-off-by: Frank Li <Frank.Li@xxxxxxx> > --- > drivers/i3c/master/Makefile | 3 +- > drivers/i3c/master/svc-i3c-main.c | 52 +++++++++++++++++++++++++++++ > drivers/i3c/master/svc-i3c-master.c | 34 ++++--------------- > drivers/i3c/master/svc-i3c.h | 11 ++++++ > 4 files changed, 71 insertions(+), 29 deletions(-) > create mode 100644 drivers/i3c/master/svc-i3c-main.c > create mode 100644 drivers/i3c/master/svc-i3c.h > > diff --git a/drivers/i3c/master/Makefile b/drivers/i3c/master/Makefile > index 3e97960160bc8..484cb81f45821 100644 > --- a/drivers/i3c/master/Makefile > +++ b/drivers/i3c/master/Makefile > @@ -2,5 +2,6 @@ > obj-$(CONFIG_CDNS_I3C_MASTER) += i3c-master-cdns.o > obj-$(CONFIG_DW_I3C_MASTER) += dw-i3c-master.o > obj-$(CONFIG_AST2600_I3C_MASTER) += ast2600-i3c-master.o > -obj-$(CONFIG_SVC_I3C_MASTER) += svc-i3c-master.o > +svc-i3c-objs += svc-i3c-main.o svc-i3c-master.o > +obj-$(CONFIG_SVC_I3C_MASTER) += svc-i3c.o > obj-$(CONFIG_MIPI_I3C_HCI) += mipi-i3c-hci/ > diff --git a/drivers/i3c/master/svc-i3c-main.c b/drivers/i3c/master/svc-i3c-main.c > new file mode 100644 > index 0000000000000..053b2bd9d8317 > --- /dev/null > +++ b/drivers/i3c/master/svc-i3c-main.c ... > +module_platform_driver(svc_i3c_master); > \ No newline at end of file > diff --git a/drivers/i3c/master/svc-i3c.h b/drivers/i3c/master/svc-i3c.h > new file mode 100644 > index 0000000000000..0bd1f0112a071 > --- /dev/null > +++ b/drivers/i3c/master/svc-i3c.h ... > +#endif > \ No newline at end of file Add the trailing newline characters. -- i.
