RE: max14830 nobody cared Disbling IRQ issue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,
We are investigating another hardware issue. I will resume the old thread after that, if I need to.
Thanks.
Usha

> -----Original Message-----
> From: Hugo Villeneuve <hugo@xxxxxxxxxxx>
> Sent: Tuesday, January 16, 2024 9:43 AM
> To: Srinivasan, Usha <usha.srinivasan@xxxxxxxxxxxxxxxxxxxx>
> Cc: linux-serial@xxxxxxxxxxxxxxx
> Subject: Re: max14830 nobody cared Disbling IRQ issue
>
> On Mon, 15 Jan 2024 19:07:30 +0000
> "Srinivasan, Usha" <usha.srinivasan@xxxxxxxxxxxxxxxxxxxx> wrote:
>
> > Hi, Hugo.
> > We fixed our clock issue in the platform; and you were right, I need to bump
> the delay to 100 in addition. I pulled in the latest version of max310x.c from
> torvals linux and I still get the "nobody cared" stack traces & the interrupts get
> disabled.  I'm hoping you can help me get beyond this.
> >
> > 57:     100001          0 1e780000.gpio 152 Level     11-006c
> >  58:     500001          0 1e780000.gpio 153 Level     11-0061
> >  59:     100001          0 1e780000.gpio 154 Level     11-0062
> >  60:     100001          0 1e780000.gpio 155 Level     11-0064
> > [   88.832861] [<da8c4f2b>] irq_default_primary_handler threaded
> [<ac7ce979>] max310x_ist
> > [   88.841725] Disabling IRQ #57
> > [  175.370303] [<da8c4f2b>] irq_default_primary_handler threaded
> > [<ac7ce979>] max310x_ist [  175.379166] Disabling IRQ #59 [
> > 262.242889] [<da8c4f2b>] irq_default_primary_handler threaded
> > [<ac7ce979>] max310x_ist [  262.251752] Disabling IRQ #60 [
> > 369.903466] [<da8c4f2b>] irq_default_primary_handler threaded
> > [<ac7ce979>] max310x_ist [  369.912332] Disabling IRQ #58
> >
> > Thank you.
> > Usha
> > External recipient
>
> Hi Usha,
> please respond to the original email thread, so that people can see what has
> been done so far and better help you.
>
> With your crystal issues solved, do you see the exact same problem as before?
>
> Can you confirm with a voltmeter or an oscilloscope that your IRQ pin is
> behaving properly before and after you insert the max310x kernel module?
> Maybe it could help if you shared your DTS configuration.
>
> Also, just to be sure, you should not just pull the max310x source code itself,
> but use the whole tree to compile your kernel.
>
> Hugo Villeneuve
External recipient





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux