USART has registers above 0xff offset, so extend variable type to u16.
And change UNDEF_REG to 0xffff.
Signed-off-by: Valentin Caron <valentin.caron@xxxxxxxxxxx>
---
drivers/tty/serial/stm32-usart.h | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
index 5ce1d3aae07e..bf3720948704 100644
--- a/drivers/tty/serial/stm32-usart.h
+++ b/drivers/tty/serial/stm32-usart.h
@@ -9,18 +9,18 @@
#define DRIVER_NAME "stm32-usart"
struct stm32_usart_offsets {
- u8 cr1;
- u8 cr2;
- u8 cr3;
- u8 brr;
- u8 gtpr;
- u8 rtor;
- u8 rqr;
- u8 isr;
- u8 icr;
- u8 rdr;
- u8 tdr;
- u8 presc;
+ u16 cr1;
+ u16 cr2;
+ u16 cr3;
+ u16 brr;
+ u16 gtpr;
+ u16 rtor;
+ u16 rqr;
+ u16 isr;
+ u16 icr;
+ u16 rdr;
+ u16 tdr;
+ u16 presc;
};
struct stm32_usart_config {
@@ -37,7 +37,7 @@ struct stm32_usart_info {
struct stm32_usart_config cfg;
};
-#define UNDEF_REG 0xff
+#define UNDEF_REG 0xffff
/* USART_SR (F4) / USART_ISR (F7) */
#define USART_SR_PE BIT(0)
--
2.25.1
